Fitting Kit
EN
K880W
●
Carefully select desired position for
crossbars on vehicle roof.
●
Adjust crossbar in or out to suit vehicle.
Refer to the crossbar instructions for
crossbar adjustment.
●
Apply masking tape to vehicle roof in all
four positions.
●
Make sure there is no interference between
what you intend to carry with aerials,
sunroof or tailgate.
●
Place crossbar on vehicle. Minimum
recommended spacing between the bars is
700mm (27 1/2") (unless otherwise stated).
●
Trace around rubber pad using a pencil or
pen.
●
Repeat for all four positions.
●
Remove both pins from each leg. Use
tapered end of spanner located inside left
hand cover to assist.
●
Repeat for all legs.
7
