Whispbar K581W, Fitting Instructions For Basic Carrier

Page: 39 / 85

Fitting Kit
K581W
GB
Fitment
Please check the rear of this manual for
information relating specifically to your
vehicle.
Place crossbar on vehicle. Minimum
recommended spacing between the bars is
700mm (27 1/2") (unless otherwise stated).
NOTE: FRONT CROSSBAR ONLY
Clamps directly to edge of roof under the
doors
NOTE: REAR CROSSBAR ONLY
Clamps directly to edge of roof under the
doors, pin locates in hole on vehicle
Adjust the legs on the crossbar so that they
are positioned equally from the ends of the
crossbar, and the clamps engage firmly on
the body work of the vehicle.
Tighten adjusting screw to 5 Nm (3.7 ft lb).
39