Fitting Kit
EN
K385W
Fitment
●
Remove plastic plugs from fixed points in
the roof with a flat-head screw driver.
●
Select grubscrews and screw into the
vehicle's fixed points.
●
Note: Use longer (70mm (2 3/4"))
grubscrew at the front and shorter (60mm
(2 3/8")) at the rear fixed points.
●
Place crossbar foot over grubscrews.
●
Ensure the pads are in the correct position
and the clamp threads pass through the
crossbar feet.
●
Tighten adjusting screw to 5 Nm (3.7 ft lb)
hand tight.
8
