Whirlwind Cargo, Assembly Instructions Manual

Page: 20 / 47

20
SEE SEAT HEIGHT ASJUSTMENT SECTION OF THIS GUIDE AND VIDEO FOR MORE INFORMATION
26. Note on seat height: the bolts on the seat clamp and seat rail guide are usually installed above
the seat rail but can also be installed below in order to lower the seat.
27. With the seat off of the tricycle: Install the front seat rail guides with M8 bolts to the front
ladder of the seat as shown. The bolt head should be outside the seat, and the M8 locknut is
trapped inside the channel. Align the faces of the nut so that it is secured inside the channel.
LOCK NUT TRAPPED INSIDE
CHANNEL
BOLT HEADS CAN BE ABOVE OR
BELOW SEAT RAIL, IN ANY ONE
OF THE 6 HOLES TO SET SEAT
HEIGHT AND SEAT ANGLE
SEAT CLAMP
ABOVE: BRAKE CLAMP
PARTS, (THIN MATERIAL),
NOT FOR SEAT