Use appropriate plug. The earth
should be well connected.
Pull out the plug when not in
use.
If wiring is defective, do contact after-
sales service.
Do not install the washing machine in a damp
environment. Do not splash water on switches. Do
not put wet clothes on control panel.
Do not pour water with temperature above 50 C into
the wash tub.
Do not put your hand into the spin or wash tub while
it’s working.
Do not dismantle, repair or refit washing machine by
yourself
Do not put hot or heavy object on the washing
machine.
Clothes stained with volatile substance(eg. Thinner,
fuel, etc) should not be washed in the washing
machine.
Do not let children play with washing machine.
Keep the machine away from direct sunlight and
heat source.
Precautions and Recommendations
2
INSTALLATION
Please install your washing machine according to the instructions provided.
Using the drain hose
The hose should drain smoothly
1.
The fixation height of the hose should be less than
10cm from the ground.
2.
Maximum fixation height for the hanging hose(with a
hook) over a drain outlet (eg. Drain pipe, bath or
sink) should not be higher than 1.2meters above the
floor. (This is for pump drain model only)
3.
Do not trample or press the hose.
Change the direction of the drain hose
Factory installation position of the drain hose is shown in
Figure 1.
The hose protrudes out of the washing tub side.
Lay down the machine. And take the hose out from the
fixing groove. (Figure 2)
Along with the grove of the washing tub side, insert the
hose with steps 1 to 3 and spread it to the washing side.
(Figure 3)
Insert the hose in the groove by hand, do not damage the
hose.
3
