Service Bulletin
AUTHOR
Last Update
VERSION
TITLE
Reprogramming of Washer&Dryer appliance produced in Comunanza (Combo)
SUBJECT
INVOLVED PRODUCTS: Whirlpool and Bauknecht Wash&Dryers appliances produced in
Comunanza factory.
GENERAL REQUIREMENTS
For main board programming, use one of the following tools:
- SMART READER (spare part code 482000021959 - C00272306) + SMART CARD.
- PC with MEMWRITER ins HW KEY (USB, BLUETOOTH). Or the PDA (Windows
mobile 6.5) + HW KEY (only BLUETOOTH).
A) Use of SMART SMART CARD
From the label extract the 12nc and the serial number. Search in WEDOC the SMART CARD
code and order it from the Spare Part Center. How to use:
1) Disconnect the appliance from supply and wait 5 minutes.
2) Insert the smart card into the smart reader.
3) Insert the smart reader inside the mainboard slot.
4) Connect the machine to the mains supply.
5) Programming sequence:
Permanent Red: smart reader power supply.
Flashing green: download in progress.
4812 712 40417
Gabriele Cambiotti
30/05/16
1.0
Reprogramming of Washer&Dryer appliance produced in Comunanza (Combo)
SERVICE
Whirlpool EMEA
Customer Service
Service Bulletin 481271240417
page 1 of 3
© Whirlpool EMEA
Subject to modifications
www.scc-service.com
This document is only intended for qualified technicans who are aware of the respective safety regulations.
