11
RANGE HOOD CARE
Cleaning
IMPORTANT: Clean the hood and gr
ease filters fr
equently
according to the following instructions. Replace grease
filters
before operating hood.
Exterior Surfaces
To avoid damage to the exterior surface, do not use steel wool
or soap-filled scouring pads.
Always wipe dry to avoid water marks.
Cleaning Method:
■
Liquid detergent soap and water or all-purpose cleanser
■
Wipe with damp soft cloth or nonabrasive sponge,
and then rinse with clean water and wipe dry.
Metal Grease Filter
1.
Remove the filter by pulling the spring r
elease handle
and
then pulling down the filter
.
2. W
ash metal filter as needed in dishwasher or hot
detergent solution.
3.
Reinstall the filter by making sur
e the spring release handles
are toward the fr
ont. Insert aluminum filter into upper track.
4. Push in spring release handle.
5.
Push up on metal filter and r
elease handle to latch into place.
Non-Vented (recirculating) Installation Filters
The char
coal filter is not washable. It should last up to
6 months with normal use. Replace with Charcoal Filter Kit. See
the “Assistance or Service” section to order.
To replace char
coal filter:
1. Remove metal gr
ease filter fr
om range hood.
See “Metal Grease Filter” in this section.
2. Bend spring clips away from metal gr
ease filter
.
3. Place char
coal filter into top side of metal filter
.
4. Bend spring clips back into place to secure the
charcoal
filter
to the metal filter
.
5. Replace metal gr
ease filter
. See “Metal Grease Filter”
in this section.
Replacing a LED Lamp
The LED lights are replaceable by a service technician only.
See the “Warranty” section for service contact information.
A
A. Spring release handle
