background image

7

Replace the water filter cartridge when the water filter status display 

changes to “REPLACE.” 
NOTE: If water flow to your water dispenser or ice maker decreases 

noticeably, change the filter sooner. The filter should be replaced at 

least every 6 months, depending on your water quality and usage.

Resetting the Filter Status

After changing the water filter, reset the status light. Press the 

OPTIONS button to enter Options mode, then press LOCK to 

initiate the reset, then press MEASURED FILL to confirm that you 

want to reset the status light. 
When the system is reset, the “ORDER” and “REPLACE” icons will 

disappear from the display screen.

Changing the Water Filter  

1. Locate the water filter in the top-right 

corner of the refrigerator compartment.

2. Lift open the filter cover door. The filter 

will be released and then be ejected as 

the door is opened.

3. When the door is completely open, pull 

the filter straight out.
NOTE: There may be some water in the 

filter. Some spilling may occur. Use a 

towel to wipe up any spills.

4. Take the new filter out of its packaging and remove the cap. Be 

sure the O-rings are still in place after the cap is removed.

5. With the arrow pointing up, align the new filter with the filter 

housing and slide it into place. The filter cover door will 

automatically begin to close as the new filter is inserted.

6. Close the filter cover door completely in order to snap the filter into 

place. You may need to press hard.

7. Flush the water system. See “Water and Ice Dispensers.”

NOTE: The ice maker has an automatic shutoff to keep the storage bin 

from overfilling during normal operation. As ice is made, the ice cubes 

will fill the ice storage bin, and the ice cubes will raise the wire shutoff 

arm to the OFF (arm up) position. Do not force the wire shutoff arm up 

or down.

Removing and Replacing the Ice Storage Bin:

1. Pull the covering panel up from the bottom.
2. Lift the wire shutoff arm so it clicks into the OFF (up) position.
3. Lift up the front of the storage 

bin and pull it out. 

4. Replace the bin by pushing it in 

all the way or the dispenser will 

not work. 

5. To restart ice production, lower 

the wire shutoff arm into the 

ON (down) position. Make sure 

the door is closed tightly.

Water Filtration System

Water Filter Status Light

The water filter status light will help you know when to change your 

water filter. 

When the dispenser control panel’s water filter status display 

changes to “ORDER,” this tells you that it is almost time to change 

the water filter cartridge. 

Do not use with water that is microbiologically unsafe or 

of unknown quality without adequate disinfection before 

or after the system. Systems certified for cyst reduction 

may be used on disinfected waters that may contain 

filterable cysts.

The following accessories are available for your refrigerator. 
To order an accessory: Contact us and ask for the part number listed, 

or contact your authorized dealer. 
In the U.S.A., call 

1-800-442-9991 or visit 

www.whirlpool.com/accessories.
In Canada, call 

1-800-807-6777 or visit www.whirlpoolparts.ca.

affresh

®

 Stainless Steel Cleaner: 

Order Part #W10355016

In Canada, order Part #W10355016B

affresh

®

 Stainless Steel Wipes: 

Order Part #W10355049

In Canada, order Part #W10355049B
affresh

®

 Kitchen & Appliance Cleaner: 

Order Part #W10355010

In Canada, order Part #W10355010B
Water Filter: 

Order Part #W10295370A (P4RFWB)
Air Filter: 

Order Part #W10311524
Produce Preserver: 

Order Part #W10346771

ACCESSORIES

For recommendations that may help you avoid a service call, scan the code at left with your mobile 

device, or visit www.whirlpool.com/product_help.
For a complete Problem Solver listing with more information about additional topics, see the 

Installation Instructions and Owner’s Manual provided with your refrigerator, or visit our website and 

download the User Instructions for your model.

PROBLEM SOLVER

Style 2
Turning the Ice Maker On/Off:

To turn ON the ice maker, simply lower the wire shutoff arm.
To manually turn off the ice maker, lift the wire shutoff arm to the 

OFF (arm up) position and listen for the click. Ice can still be 

dispensed, but no more can be made.

Summary of Contents for WRSA88FIHZ









Reviews: