THE BUTLER SERIES
– OWNER’S INSTRUCTIONS
12
TROUBLESHOOTING
Electrical Shock Hazard
PROBLEM
Refrigerator does not work
Ice formation is slow
Cooling in the refrigerator
is not enough
Refrigerator runs non stop
Refrigerator side walls are
hot
Refrigerator gives a mild
shock
Refrigerator compartment
is smelly
PROBING
Is the power cord plugged in the
socket
Is there a power breakdown
Has the circuit breaker tripped
Is the air flow knob set to normal
ice position
Is your refrigerator
compartment knob set to
lower value
Is the passage obstructed by food
Are the refrigerator doors fully
closed
Are you storing hot foods in the
refrigerator
Are there any pads or plastic
covers on the shelf
Is the cooling level set to high
position
Is the door left open for long
This is not a problem. The walls
heat slightly during normal
operation
Is your house earthing proper
Has the refrigerator not been
cleaned recenly
Is there an object with strong smell
inside
SOLUTION
Reconnect the power plug
Wait till the power resumes
Check through some electrician
Set your upper compartment knob
(Airflow knob) to fast ice mode
Rotate the knob to set it to higher
value. Refer page 5
Reposition the food items kept
directly in front of the air duct
Ensure always doors to be in
completely closed position
Do not keep hot utensils in the
refrigerator
Remove all pads or plastic covers to
clear the airflow path
Reduce it to lower levels
Ensure always doors to be in
completely closed position
Please refer to the sticker pasted on
side wall
Please get your house wiring
checked by some electrician
Please clean your refrigerator
frequently
Prevent storing food items which
emanates strong smell
position. Refer page 5
Rotate the knob to set it to 1
2
o clock
knob set to max freez e
’
Is your freez er compartment
W10550471_Whirlpool_Manual Butler.indd 12
W10550471_Whirlpool_Manual Butler.indd 12
04/11/12 4:47 PM
04/11/12 4:47 PM
