background image

5

Following is a list of available parts and supplies which may be purchased separately. Please refer to the cover for contact and model identification 
information.

Replacement Parts

Turntable

Turntable support and rollers

Turntable hub

Grease filter

Charcoal filter

Cooktop light bulb

Cavity light bulb

Cleaning Supplies

Heavy Duty Degreaser

affresh

®

 Kitchen Appliance Cleaner

affresh

®

 Stainless Steel Cleaner

affresh

®

 Stainless Steel Wipes

ACCESSORIES

Scan the code at left with your mobile device, or visit www.whirlpool.com/product_help for 
recommendations that may help you avoid a service call.

If you experience

Recommended Solutions

Microwave oven will 
not operate

Check the following:

Household fuse or circuit breaker - If a household fuse has blown or a circuit breaker has tripped, replace the 
fuse or reset the circuit breaker. If the problem continues, call an electrician.

Magnetron - Try to heat 1 cup (250 mL) of cold water for 2 minutes at 100% cooking power. If water does not 
heat, try the steps in the bullets below. If microwave oven still does not operate, call for service.

Door - Firmly close door. On some models, if a packaging spacer is attached to inside of the door, remove it, 
then firmly close door.

If a message about the door appears in the display, the door has been closed for 5 minutes or more without the 
microwave oven being started. This occurs to avoid unintended starting of the microwave oven. Open and close 
the door, then start the cycle.

Control - Make sure control is set properly. Make sure Control Lock is off. Make sure Demo Mode (on some 
models) is off.

Arcing in the 
microwave oven

Check the following:

Soil buildup - Soil buildup on cavity walls, microwave inlet cover, cooking rack supports, and area where the 
door touches the frame can cause arcing. See “General Cleaning” in “Microwave Oven Care” section.

Turntable alternates 
rotation directions

This is normal and depends on motor rotation at the beginning of the cycle.

Display shows 
messages

A flashing “:” or “PF” means there has been a power failure. Reset the clock.

A letter followed by a number is an error indicator. Call for assistance.

Fan running during 
cooktop usage

This is normal. The microwave oven’s cooling fan (on some models), which is separate from the vent fan, 
automatically comes on during microwave oven operation to cool the microwave oven. It may also 
automatically come on and cycle on and off to cool the microwave oven’s controls while the cooktop below is 
being used.

Radio, TV or cordless 
phone interference

Check the following:

Proximity - Move the receiver away from the microwave oven, or adjust the radio or TV antenna.

Soil - Make sure the microwave oven door and sealing surfaces are clean.

Frequency - Some 2.4 GHz-based cordless phones and home wireless networks may experience static or noise 
while microwave oven is on. Use a corded phone, a different frequency cordless phone or avoid using these 
items during microwave oven operation.

PROBLEM SOLVER

Summary of Contents for WMH31017A







Reviews: