background image

7

Register for reminders to change filters

at whirlpoolwatertreatment.com

Filter Cartridges

Filter Cartridge Life

Taste and Odor Cartridges:

A taste and odor cartridge contains activated carbon. When new, open the

filtered water faucet and allow fine, carbon particles to purge from the cartridge. Flush for 10 minutes. It

is recommended to 

replace filter cartridge every six months

of use. There are several variables that

determine how long a cartridge will last. These include:

1

. How much water you use, and

2

. How much sediment, taste and/or odor, or other unwanted substance, is in the water.

Use the following information as a guide. However, no matter which type of cartridge you are using, you

will know it is time to replace them when you first notice the return of the unwanted sediment, taste

and/or odor in your water, or when the flow diminishes or stops.
Whirlpool

®

Undersink Full Flow Water Filtration System model WHEUFF with replacement element

WHEURF conforms to NSF/ANSI 42 and 53 for the specific performance claims as verified and substan-

tiated by test data. The rated capacity for this system is 2000 gallons (7570 liters) at a rated service flow

of 2.0 gallons per minute (7.57 liters per minute).

Filter Cartridge Replacement

NOTE:

There is no need to shut off the water supply when replacing the filter cartridge.

1

. Turn filter cartridge to the left to remove cartridge from the filter head.

2

. Dispose of the cartridge in a proper manner.

3

. Install new cartridge. Turn cartridge to the right to re-attach to the filter head.

Taste and Odor Cartridges:

Taste and odor cartridges contain activated carbon, a black powder.

When new, open the filtered water faucet and allow fine, carbon particles to purge from the cartridge.

Flush for 10 minutes.

FIG. 6

head

filter cartridge

Turn filter cartridge 

to the left

to remove from head

Turn filter cartridge 

to the right

to attach to head

Questions? Call Toll Free 1-866-986-3223

Monday- Friday, 8 AM - 7 PM EST

or visit whirlpoolwatertreatment.com

When you call, please be prepared to provide the model number and date code, found on the filter head.

Summary of Contents for WHEUFF









Reviews: