4
Parts of the System
Filtered Water
Faucet
SINK
Supply Fitting
HOT
COLD
Shutoff Valve
If tubing needs to make
a sharp bend, use
included tube benders
to prevent kinking.
Yellow Tubing
WATER
IN
Blue Tubing
WATER
OUT
Install the mounting hardware at
least
15-1/2”
above the bottom
of the cabinet, to provide a mini-
mum of 1-1/2" under the system
for removing the filter cartridges
to change them.
8-1/2”
Filter
1
Filter
2
Filter
3
FIG. 2
Filter system assembly
Water supply fitting
Filtered water faucet for sink or countertop mounting
Color coded 3/8" tubing to make all needed connections
3/8" tubing bends
Materials and Tools Needed
NOTE:
Gather the required tools before starting installation. Read and
follow the instructions provided with any tools listed here.
Slotted and Phillips screwdrivers
Pliers and adjustable jaw wrench
Tubing cutter
Electric drill and 1-1/4" drill bit if mounting hole is needed for the faucet
IMPORTANT:
To avoid damaging the sink, consult a qualified plumber or
installer for drilling procedures in porcelain or stainless steel.
Typical Undersink Installation
Locate the water filter housing on the cold water supply pipe, under the kitchen and/or bathroom sink, to
filter the cold drinking water. Refer to the following drawing.
