10
Oven Vent
The oven vent releases hot air and moisture from the oven,
and should not be blocked or covered. Blocking or covering the
oven vent will cause poor air circulation, affecting cooking and
cleaning results. Do not set plastics, paper, or other items that
could melt or burn near the oven vent.
Baking and Roasting
ACCUBAKE
®
Temperature Management System
The ACCUBAKE
®
system electronically regulates the oven heat
levels during preheat and bake to maintain a precise temperature
range for optimal cooking results. The bake and broil elements
cycle on and off in intervals. The bake element will glow red when
cycling on; the broil element will not. This feature is automatically
activated when the oven is in use.
Before baking and roasting, position racks according to
“Positioning Racks and Bakeware” section. When roasting, it is not
necessary to wait for the oven preheat cycle to end before putting
food in unless it is recommended in the recipe.
Preheating
When START is pressed, the oven will begin preheating. Once
100ºF (38ºC) is reached, the display temperature will increase as
the actual temperature of the oven increases. When the preheat
temperature is reached, a tone will sound, and the selected
temperature will appear on the display.
Broiling
Leave the door open 6" (15 cm) at the broil stop position to ensure
proper broiling temperature. Preheat the oven for 5 minutes before
putting food in unless recommended otherwise in the recipe.
Position food on grid in a broiler pan, then place it in the center of
the oven rack.
NOTE:
Odors and smoke are normal the first few times the oven
is used or if the oven is heavily soiled.
Changing the temperature when broiling allows more precise
control when cooking. The lower the broil setting, the slower the
cooking. Thicker cuts and unevenly shaped pieces of meat, fish
and poultry may cook better at lower broil settings. Use racks 4
or 5 for broiling. Refer to the “Positioning Racks and Bakeware”
section for more information.
On lower settings, the broil element will cycle on and off to
maintain the proper temperature.
■
For best results, use a broiler pan and grid. It is designed to
drain juices and help avoid spatter and smoke.
If you would like to purchase a broiler pan, one may be
ordered. Please refer to the “Accessories” section for more
information.
Cook Time (on some models)
To Set a Timed Cook:
1.
Press BAKE. The bake indicator light will light up.
2.
Press the TEMP/TIME “up” or “down” arrow pads to enter a
temperature other than the one displayed.
3.
Press COOK TIME. The cook time oven indicator light will light
up.
4.
Press the TEMP/TIME “up” or “down” arrow pads to enter the
length of time to cook.
5.
Press START. The display will count down the time. When the
time ends, the oven will shut off automatically and “End” will
appear on the display.
6.
Press CANCEL to clear the display.
To Set a Delayed Timed Cook:
Before setting, make sure the clock is set to the correct time
of day. See the “Clock” keypad feature in the “Feature Guide”
section.
1.
Press BAKE.
2.
Press the TEMP/TIME “up” or “down” arrow pads to enter a
temperature other than the one displayed.
3.
Press COOK TIME. The cook time oven indicator light will light
up.
4.
Press TEMP/TIME “up” or “down” arrow pads to enter the
length of time to cook.
5.
Press START TIME. The start time/delay oven indicator light
will light up.
6.
Press TEMP/TIME “up” or “down” arrow pads to enter the time
of day to start.
7.
Press START.
When the start time is reached, the oven will automatically turn
on. The temperature and/or time settings can be changed anytime
after pressing Start by repeating steps 1-7. When the set cook
time ends, the oven will shut off automatically and “End” will
appear on the display.
8.
Press CANCEL to clear the display.
A
A. Oven vent
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
