4
DRYER DImEnSIonS
Front view:
27"
(686 mm)
3
/
4
"
(18 mm)
42
3
/
8
"
(899 mm)
* Approx. measurement
Side view:
30
7
/
8
"
(783 mm)
Back view:
9"
(228 mm)
35
1
/
2
"
(902 mm)
3
1
/
2
"
(89 mm)
14
1
/
2
"
(368 mm)
1
1
/
2
"
(36 mm)
5
3
/
4
"
(149 mm)
3
1
/
4
"
(88 mm)
6
1
/
4
"
(156 mm)
noTE:
Most installations require a minimum of 5" (102 mm)
clearance behind dryer for exhaust vent with elbow. See
“Venting Requirements.”
ImPoRTAnT:
Do not operate, install, or store dryer where
it will be exposed to water, weather, or at temperatures below
45° F (7° C). Lower temperatures may cause dryer not to shut
off at end of automatic sensor cycles, resulting in longer
drying times.
Installation spacing for recessed area or closet:
All dimensions show recommended spacing allowed, with
tested spacing of 0" (0 mm) clearance on sides and rear.
Additional spacing should be considered for ease
■
of installation and servicing.
Additional clearances might be required for wall, door,
■
and floor moldings.
Additional spacing should be considered on all sides
■
of the dryer to reduce noise transfer.
For closet installation, with a door, minimum ventilation
■
openings in the top and bottom of the door are required.
Louvered doors with equivalent ventilitation openings
are acceptable.
Companion appliance spacing should also be considered.
■