7
1
Remove bulk food and load dishwasher.
Scrape off excess food into
garbage or food disposer.
Load dishes so that
water spray will reach
every surface.
2
Add detergent and rinse aid.
SLIDE
SLIDE
3
Select a cycle and options.
4
Start dishwasher.
To start and resume a cycle,
press START/RESUME
and close the door within
4 seconds. If the door is not
closed within 4 seconds, the
Start/Resume button LED
will flash, an audible tone
will sound, and the cycle will
not start.
5
Unload dishwasher and
clean the filter.
See “Recommended Time
Interval to Clean Your Filter”
in the “Filtration System”
section for the recommended
cleaning schedule.
Quick Steps
STEP 3
Dishwasher Setup (time sensitive step)
A
D
C
B
A. Wireless Status icon
B. Remote Enable icon
C. Amber House icon
(peak electric rates)
D. Blue House icon
(normal electric rates)
While the Router’s WPS indicator light is blinking, touch and hold
the CONNECT button on the dishwasher for 5 seconds. The
Wireless Status icon (A) will blink slowly and the Time Display
LEDs will animate to show that the dishwasher is attempting to
connect with the router. Connection can take up to 2 minutes.
The Wireless Status icon will stay lit upon successful connection;
if not successful the Wireless Status icon will blink rapidly and
turn off.
Once the dishwasher connects to your router, the dishwasher
will automatically attempt connection with the Whirlpool server
over the Internet. The Blue House icon (D) will then blink slowly to
show the Internet connection process is occurring. This process
can also take up to 2 minutes. Upon successful connection, this
icon will turn on and remain lit.
Refer to the previous control panel illustration with callouts for the
icon indicators.
When your appliance is connected to Wi-Fi and successfully
communicating with the Whirlpool server, return to the app
and add an appliance. Choose the option in the app that the
appliance you are adding is already connected to Wi-Fi.
If Your Dishwasher Doesn’t Connect
If your dishwasher fails to connect to the server, the Blue House
icon will blink rapidly and then turn off. However, the dishwasher
will continue to try to connect to the server automatically.
If your dishwasher still fails to connect, refer to the
“Troubleshooting — Connectivity” section of these User
Instructions, check any connection instructions for your specific
router, and refer to alternate instructions at
www.whirlpool.com/
connect
. If you have further problems or questions, call the
Connected Appliance Team at
1-866-333-4591
.
