Whirlpool WBA 3399 NFC IX, Use And Care Manual

Page: 18 / 36

18
SMART DISPLAY
This optional function can be used to save energy.
To activate/deactivate the Smart
Display, press and hold Fridge and
Freezer buttons at the same time for 3
seconds until an audible signal sounds.
Two seconds after activation of the Smart
Display, the display goes off, except the 6th
Sense Fresh Control indicator.
If Smart Display is active - to adjust the temperature
or use other functions, it is necessary to activate the
display by pressing any button.
After about 15 seconds without performing any
action, the display goes off again and only the 6th
Sense Fresh Control indicator remains visible.
When function is deactivated the normal display is
restored.
The Smart Display is automatically disabled after a
power failure. Remember that this function does
not disconnect the appliance from the power
supply, but only reduces the power consumed by
external display.
Note
The declared appliance energy consumption refers
to operation with the Smart Display function
activated.
TEMPERATURE ALARM
The acoustic alarm sounds and temperature
indicator (°C) blinks.
The alarm is activated when:
› The appliance is connected to the power supply
after prolonged disuse;
› The freezer compartment temperature is too high;
› The quantity of fresh foods loaded into the freezer
exceeds that indicated on the rating plate;
› The freezer door has been left open for a long
time.
To mute the alarm buzzer press Reset/
Alarm button just once. The Alarm
indicator is automatically turned-off as soon
as the freezer compartment reaches a temperature
below -10°C and the temperature set indicator (°C)
stop blinking and shows the chosen setting.
kEY LOCk
This function prevents anyone from inadvertently
changing settings or switching off the appliance.
To lock the keys, press Reset/Alarm
button for 3 seconds until the display
shows the Key Lock indicator and an
acoustic signal confirms the function has been
selected. After 3 seconds indicator goes off. When
activated, pressing the other buttons (except Reset/
Alarm button) activates an audible signal and on
display flashes the Key Lock indicator. Any alarm can
be deactivated when Key Lock function is active.
To unlock the keys, follow the same procedure until
the display shows the Key Lock indicator and an
acoustic signal confirms the function has been
disengaged. After 1 second indicator goes off.