8
2.
Remove the foot from the right front spacer by removing the
#8-18 x
³⁄₈
" screw.
NOTE:
Do not remove the spacer.
3.
Rotate the foot 90° so the short side of the foot is positioned
toward the top of the oven.
4.
Reinstall the foot to the spacer using the #8-18 x
³⁄₈
" screw
previously removed.
5.
In the same manner, remove, rotate and reinstall the feet on
the right rear, left front, and left rear of the oven.
6.
Using 2 or more people, place the oven in its upright position.
7.
Go to the “Make Electrical Connection” section.
Double Ovens
The positioning of the oven feet allow a double oven to be
installed in a cutout height between 48
⁷⁄₈
" (124.1 cm) and
5
2³⁄₁₆
" (132.6 cm). Refer to the following instructions to position
the feet for the size of your cabinet cutout.
Cutout height is between 48
⁷⁄₈
" (124.1 cm) and
50
⁷⁄₁₆
" (128.1 cm)
The oven feet do not need to be installed. The oven is configured
correctly as received.
NOTE:
Do not remove the spacers.
Go to the “Make Electrical Connection” section.
A. Spacer
B. Foot
C. #8-18 x
³⁄₈
” screw
A
B
C
A. Spacers
A
A
Summary of Contents for W10351242B
Page 15: ...15 Notes ...
Page 16: ...16 Notes ...
