manualshive.com logo in svg

Whirlpool W10351242B, Installation Instructions Manual

Share
Download
Whirlpool W10351242B Installation Instructions Manual Download Page 1

INSTALLATION INSTRUCTIONS

27 " (68.6 CM) AND 30" (76.2 CM) ELECTRIC 

SINGLE AND DOUBLE BUILT-IN OVEN

INSTRUCTIONS D’INSTALLATION

FOUR ÉLECTRIQUE ENCASTRÉ 

27" (68,6 CM) ET 30" (76,2 CM) - SIMPLE ET DOUBLE

BUILT-IN OVEN SAFETY

Table of Contents/Table des matières

BUILT-IN OVEN SAFETY ...............................................................1

INSTALLATION REQUIREMENTS ................................................2

Tools and Parts ............................................................................2
Location Requirements................................................................2
Electrical Requirements ...............................................................5

INSTALLATION INSTRUCTIONS ..................................................6

Prepare Built-In Oven...................................................................6
Remove Oven Door......................................................................6
Positioning Oven Feet for Multiple Cabinet Cutout Heights .......7
Make Electrical Connection .......................................................10
Install Oven.................................................................................12
Complete Installation .................................................................14

SÉCURITÉ DU FOUR ENCASTRÉ ..............................................17

EXIGENCES D'INSTALLATION ...................................................17

Outillage et pièces......................................................................17
Exigences d'emplacement.........................................................18
Spécifications électriques ..........................................................20

INSTRUCTIONS D'INSTALLATION.............................................22

Préparation du four encastré .....................................................22
Dépose de la porte du four ........................................................22
Positionnement des pieds du four pour des ouvertures 
d'encastrement de hauteur différente........................................23
Raccordement électrique...........................................................26
Installation du four......................................................................28
Achever l’installation ..................................................................30

IMPORTANT:

 

Save for local electrical inspector's use.

IMPORTANT :

À conserver pour consultation par l'inspecteur local des installations électriques.

W10351242B

You can be killed or seriously injured if you don't immediately 
 

You

 

can be killed or seriously injured if you don't follow 

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety 
messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

Summary of Contents for W10351242B

















Reviews:

No comments

Brands by name

Popular brands

Load more brands