19
1
1.
Using a hammer and screwdriver, knock
plug into disposer.
2
2.
Use needle-nose pliers to remove plug.
3
3.
Attach drain hose to disposer inlet with
large 1" (2.5 cm) to 11/2" (3.8 cm) drain
hose clamp (not provided).
Option B: No Waste disposer—no air gap
Waste tee
Large drain
hose clamp
Drain hose
Drain trap
1
Rubber
end
1.
Fit rubber end of drain hose
to waste tee.
2
2.
Attach rubber end of drain hose to
waste tee with a hose clamp. Use a 1"
to 1
1
/
2
" (2.5 to 3.8 cm) screw-type clamp
(not provided).
Helpful Tip:
Remove disposer knockout plug.
1.
Using a hammer and screwdriver, knock
plug into disposer.
2.
Use needle-nose pliers to remove plug.
3.
Connect rubber end of drain hose
to air gap.
4
4.
Attach rubber end of drain hose to air
gap with a hose clamp. Use a 1" to 1
1
/
2
"
(2.5 to 3.8 cm) screw-type clamp
(not provided).
5
5.
Use a rubber hose (not provided) with
screw-type clamps to connect from air
gap to disposer inlet.
Option C: Waste disposer – with air gap
Large drain
hose clamp
Drain hose
Screw-type clamps
Air gap
Rubber hose
connector
Drain trap
Disposer inlet
1
2
Rubber
end
3