background image

14

CARING FOR YOUR 

REFRIGERATOR

Cleaning Your Refrigerator

Both the refrigerator and freezer sections defrost automatically. 
However, clean both sections about once a month to prevent 
odors from building up. Wipe up spills immediately.

To clean your refrigerator:

1.

Unplug refrigerator or disconnect power.

2.

Remove all removable parts from inside, such as shelves, 
crispers, etc.

3.

Hand wash, rinse, and dry removable parts and interior 
surfaces thoroughly. Use a clean sponge or soft cloth and a 
mild detergent in warm water. 

Do not use abrasive or harsh cleaners such as window 
sprays, scouring cleansers, flammable fluids, cleaning 
waxes, concentrated detergents, bleaches or cleansers 
containing petroleum products on plastic parts, interior 
and door liners or gaskets. Do not use paper towels, 
scouring pads, or other harsh cleaning tools. These can 
scratch or damage materials.

To help remove odors, you can wash interior walls with a 
mixture of warm water and baking soda (2 tbs. to 1 qt. 
[26 g to .95 L] of water).

4.

Wash stainless steel and painted metal exteriors with a clean 
sponge or soft cloth and a mild detergent in warm water. Do 
not use abrasive or harsh cleaners. Dry thoroughly with a soft 
cloth. For additional protection against damage to painted 
metal exteriors, apply appliance wax (or auto paste wax) with 
a clean, soft cloth. Do not wax plastic parts. 

NOTE:

 

Stainless steel

 exteriors (on some models) have 

unique cleaning requirements. To keep your refrigerator 
looking like new and remove minor scuffs or marks, it is 
suggested that you clean it with 

Stainless Steel Cleaner & 

Polish.

 To order the cleaner, see the “Assistance or Service” 

section.

IMPORTANT: THIS CLEANER IS FOR STAINLESS STEEL 
PARTS ONLY! 

Do not allow the Stainless Steel Cleaner & 

Polish to come into contact with any plastic parts such as the 
door handles, trim pieces, dispenser covers or door gaskets. 
If accidental contact does occur, immediately clean plastic 
part with a sponge and mild detergent in warm water. Dry 
thoroughly with a soft cloth.

5.

Clean the condenser coils regularly. Coils may need to be 
cleaned as often as every other month. This may help save 
energy.

Style 1

 - Condenser coils behind base grille:

Remove the base grille (see the “Door Removal” section).

Use a vacuum with an extended attachment to clean the 
condenser coils when they are dusty or dirty. 

Replace the base grille when finished.

Style 2

 - Condenser coils in back of the refrigerator:

Pull refrigerator out away from the wall (see the 
“Unpacking Your Refrigerator” section). 

Vacuum coils when they are dusty or dirty.

Roll refrigerator back into place. Make sure to leave 1 in. 
(2.5 cm) between the cabinet back and the wall.

Check to see if the refrigerator is level.

6.

Plug in refrigerator or reconnect power.

Changing the Light Bulbs

NOTE:

 Not all appliance bulbs will fit your refrigerator. Be sure to 

replace the bulb with one of the same size, shape, and wattage.

1.

Unplug refrigerator or disconnect power.

2.

Remove the bulb from behind the control panel in the 
refrigerator or from behind the light shield in the freezer (on 
some models). Replace it with an appliance bulb of the same 
wattage.

3.

Plug in refrigerator or reconnect power.

Power Interruptions

If the power will be out for 

24 hours or less

keep both 

refrigerator doors closed

 to help food stay cold and frozen. If 

the power will be out for 

more than 24 hours, do one of the 

following:

Remove all frozen food and store it in a frozen food locker.

Place 2 lbs. (907 g) of dry ice in the freezer for every cubic 
foot (28 L) of freezer space. This will keep the food frozen for 
two to four days.

If neither a food locker nor dry ice is available, consume or 
can perishable food at once.

REMEMBER: 

A full freezer stays cold longer than a partially filled 

one. A freezer full of meat stays cold longer than a freezer full of 
baked goods. If you see that food contains ice crystals, it may be 
refrozen, although the quality and flavor may be affected. If the 
condition of the food is poor, dispose of it.

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion,
or fire.

1

2

4

5

WARMER

WARMER

COOLER

COOLER

RECOMMENDED

 SETTING

RECOMMENDED SETTING

REFRIGERATOR

REFRIGERATOR

3

1

2

4

5

WARMER

WARMER

COOLER

COOLER

RECOMMENDED SETTING

RECOMMENDED SETTING

FREEZER

FREEZER

3

ALLOW 24 HOURS BE

TWEEN ADJUSTMENT

S

ALLOW 24 HOURS BETWEEN ADJUSTMENTS

3

3

Summary of Contents for ST18PKXJW00





















Reviews: