Whirlpool SS226 Owner'S Instruction Manual Download Page 9

2 HR

4 HR

8 HR

12 HR

LOW

AUTO

HIGH

SS 226

8

ON/OFF key

FUNCTION key

HUMIDITY key

TIMER key

LOUVER setting

CONTROL PANEL

A

1

2

3

6

5

4

13

12

11

10

16

15

14

9

8

7

B

C

D

E

A

ON/OFF key

1. Plug to the mains and the default mode is off. Press the button first time to set the 
    unit operate in Dehumidifying mode, the indicator     lights and other functions are off.

2. The unit will remember the operation settings when there is no power break. It will run 
    the same operation settings (including louver, timer, humidity and function) for the next 
     boot.

Dehumidifier operation modes: 1st press - Laundry, 2nd press - Air cleaning, 3th press - 
Dehumidifying, and so looped. 

B

FUNCTION key

3

D

TIMER key

4

Dehumidifying: Low fan speed dehumidifying, the humidity can be set  (Ionizer is also 
on in Dehumidifying mode).

5

Laundry: High fan speed dehumidifying, the humidity can not be set.  

6

Air cleaning with ionizer: 

 Air cleaning only. 

In low fan speed and 

Ionizer is on.

Internal drying: Workable after shutdown. The machine will run the fan for an hour 
to help drying the cooler, then shut down automatically.

C

HUMIDITY key

Press to set the humidity range as the indicator lights. When all indicators are off, it means
continuous dehumidifying. This setting is applicable to Dehumidifying mode only.

Press to set autooff timer as the indicator lights. When all indicators are off, it means 
continuous running.

1

2

 : Flashes when bucket is full or not positioned. Please empty or reposition.
 : Flashes when defrosting. It will return to dehumidifying when finished.

10

11

12

13

2 hours : The unit stops automatically after 2 hours.
4 hours : The unit stops automatically after 4 hours.
8 hours : The unit stops automatically after 8 hours.
12 hours : The unit stops automatically after 12 hours.

8

9

10

60-70% : The unit stops dehumidifying automatically when reaches 60-70% humidity.
50-60% : The unit stops dehumidifying automatically when reaches 50-60% humidity.
40-50% : The unit stops dehumidifying automatically when reaches 40-50% humidity.

Summary of Contents for SS226













Reviews: