12
Scenario 2: Cooking during first few hours of Sabbath
1.
Set the appliance to Convection Bake 350 F (or other
temperature) and set Cook Time.
2.
While the oven is in cooking mode, press CLOCK/OPTIONS
until you see “KCF mode”.
3.
Follow the directions on the display to activate KCF mode.
4.
The oven is now cooking.
NOTE:
Do not open the oven door during cooking. Opening
the oven door during cooking will cause heating elements and
fans to turn off.
5.
Once cooking is completed, opening the oven door will not
turn on the cavity light, allowing you to remove food from the
oven.
NOTE:
KCF can work for all cooking cycles.
NOTE:
Do not open the oven door while it is in Convection
Bake cycle during Sabbath. Due to interlock switches, opening
the door will immediately turn off heating elements.
How To Deactivate KCF Mode
1.
Press CLOCK/OPTIONS until you see “KCF mode”. Follow
directions on the display to deactivate KCF mode.
NOTE:
In case of emergency, and to comply with code
regulations, pressing CANCEL will turn off the cooking cycle
during KCF mode.
Blower Motor Maximum Time-Out During KCF Mode
If the blower motor is turned on at High Speed, it will automatically
turn off after 4 hours of operation.
Turntable
NOTE:
By touching the Turntable keypad, it is possible to switch
the turntable On and Off during some microwave cycles. The
turntable can be turned On or Off during the Manual Cook,
Manual Reheat, Manual Defrost, Manual Steam Cook, and all Easy
Convect cycles.
The turntable rotates in both directions to help cook food more
evenly. Do not operate the microwave oven without having the
turntable in place. See the “Assistance or Service” section to
reorder any of the parts.
The raised, curved lines in the center of the turntable bottom fit
between the 3 spokes of the hub. The hub turns the turntable
during microwave oven use. The rollers on the support should fit
inside the turntable bottom ridge.
A
B
C
A. Turntable
B. Support and rollers
C. Hub
KCF Mode
KCF mode is another name of Sabbath mode for display. Touch
CLOCK/OPTIONS to reach the KCF mode submenu, where KCF
mode can be enabled of disabled. Once this mode is enabled,
press and hold CLOCK/OPTIONS for 3 seconds. KCF mode can
be activated or deactivated.
When KCF mode is activated:
■
Manual intervention such as “turn the food,” “stir the food,”
and “place the food” will be skipped.
■
For Convect function, preheating will be skipped and cook
cycle will run for the remainder of the timer countdown.
■
When cook cycle finishes, there are no more beeps and no
cook end display, go to KCF Idle mode.
■
State of hood light, vent fan, and turntable cannot be changed
manually.
■
Cavity light and fan will be off when door is open.
■
No buzzer sound for any key touch response.
■
An open door will cancel cook cycle and change display to
KCF idle mode.
■
Touching the Control Lock keypad will cancel the cook cycle
and change display KCF idle mode.
Refer to the “Sabbath Mode” section for more information.
Factory Reset
User may set machine back to default state.
Remote Enable
Enable and disable app control to appliance.
Connect
Start appliance to connect to home router. Touch and hold for 15
seconds to disconnect the connection between home router and
appliance. Specifically refer to prompt on appliance display.
Appliance Registration
Go to www.mysmartsppliances.com on your home computer and
input the SAID (start date of appliance), which can be found on the
label located on the oven frame behind the top right side of the
oven door.
Sabbath Mode (KCF)
In Sabbath mode, the appliance will not turn lights or sound on/off
so that the appliance may be used during the Sabbath.
How To Use
The below scenarios provide examples of how you may use this
mode.
Scenario 1: No cooking activity during Sabbath
1.
Press CLOCK/OPTIONS until you see “KCF mode”.
2.
Follow the directions on display to activate KCF mode.
NOTE:
During KCF mode, oven light will not turn on when you
open the oven door.
