background image

4-3

USING THE TENSIONING ACCESSORIES

WEIGHT CLIPS (HEAVY, LIGHT,
& MINI)

      heavy (gray)        light (white)    mini (small white)

The  weight  clips  provide  vertical  tension  for
most types of clothes to remove wrinkles. The
clips are not designed to be used with clothing
made of cashmere, lace, or other fine fabrics
that will stretch.

Use the heavy (gray) clip for clothes made of
cotton, heavyweight wool, and polyester.

Use the light (white) clip for clothes made of
rayon, silk, knits, lightweight wool, and delicate
fabrics.

Use the mini (small white) clip for the button
column on shirts.

To use a weight clip:

• Squeeze the handles to open the clip, insert

the clothing between the pads of the clip, and
release the handles.

• Be  sure  not  to  wrinkle  the  clothing  when

installing a clip.

• Make sure that the weights touch each other

on buttondown shirts, blouses, and skirts.

• When placing a weight clip over the seams

on  pants  and  skirts,  be  sure  to  align  the
depression in the middle of the pad with the
seam.

BODY SHAPER

The  body  shaper  is  used  for  shirts,  blouses,
coats, jackets, and skirts. It  removes wrinkles
by providing horizontal tension to the body of
the clothing.

To use the body shaper:

• Make  sure  that  the  clothing  item  is  com-

pletely buttoned or zipped.

• Holding  from  outside  the  shirt,  place  the

spring-loaded end of the shaper against the
left side seam of the shirt.

• With your right hand outside the shirt, place

the right side seam against the end of the
shaper.

• Make  sure  both  ends  of  the  shaper  are

against the side seams to prevent the shaper
from falling out.

• Expand the shaper by pulling the right end

until there is enough tension to hold it inside
the clothing.

• To retract the shaper, gently press the button

on the shaper, and push the extended side
back.

Summary of Contents for Personal Valet PVBN600

























































Reviews: