-
14
-
Remote controller
Insert the batteries into RC
1. Insert a pin and gently press down on the battery
cover and push in the direction of the arrow to
remove, as shown.
2. Insert 2 AAA batteries (1.5V) into the compartment.
Ensure that “+” and “-” polarity is correctly positioned.
3. Close the battery cover on the remote control.
•
Remote Control presetting
Each time the batteries are replaced in the remote
controller, the remote controller pre-set at Heat Pump
mode. The heat pump AC remote controller can be used
to control the cool only AC models.
• The remote control will operate the air conditioner at a
distance of up to 7m.
Use RC to control the appliance
• To operate the appliance by remote control, point the
remote control at the receiving device on the indoor
unit, to ensure receiving sensibility.
• To send a message from remote control, the symbol
will flash for 1 second. On receipt of the message, the
appliance will emit a beep.
Note: please follow the instruction which matches to the remote controller you receive for Air Conditioner
operation.
Function description of buttons
1.
ON OFF BUTTON
Starts and/or Stops the appliance by pressing this button.
2.
MODE BUTTON
Used to select the operation mode.
3.
FAN BUTTON
Used to select fan speed in sequence auto, high, medium or low.
4-5. TEMPERATURE BUTTON
Used to select the room temperature. Used to set time in timer mode and
real time clock.
6.
AUTO BUTTON
Sets or cancels 6th Sense operation.In this mode,temperature and fan speed
are automatically set based on the actual room temperature.
7.
SWING BUTTON
Stops or starts horizontal adjustment louver swinging and sets the desired
up/down airflow direction.
8.
JET BUTTON
Used to start ir stop the fast cooling or heating.
9. AROUND U BUTTON
Used to start or cancel Around U function.When you press this
button,remote control transmits the actual room temperature around it to
the indoor unit,and the appliance will operate according this temperature to
let you feel more comfortable.
10. TIMER BUTTON
Used to set or cancel the timer on operation.
Used to set or cancel the timer off operation.
11. SLEEP BUTTON/DIM
1 - Short press, sets or cancels Sleep Mode operation. Sleep Mode can be set
in Cooling, Heating or Dry operation mode, this function gives you a more
comfortable environment for sleep.
2 - Long press, press 3 seconds to turn on or turn off display light on unit.
Note:Under extreme environmental conditions,it is possible to notice a temporary slight increase in noise due to the need of reaching the
comfort temperature quickly.
Symbols on RC display
1
2
3
6
11
9
5
7
4
10
8
Cooling indicator
Auto fan speed
Auto indicator
Signal transmission
Dry indicator
High fan speed
Jet indicator
Display set timer
Fan only indicator
Medium fan speed
Around U indicator
Display set temperature
Heating indicator
Low fan speed
Signal receptor
