1/2" Screws (2)
Front
Rear
1/2" Screws (2)
1/2" Screws (2)
STEP 1
1. Disconnect the microwave oven before
proceeding with installation.
2. Remove any loose items inside the microwave
oven.
3. Fasten the bottom bracket to the bottom duct
by using two 1/2
”
screws.
4. Install bottom duct with four 1/2
”
screws as
shown.
WARNING
Electrical Shock Hazard
Disconnect power before installing trim kit.
Replace all panels before operating.
Failure to do so can result in death or electrical shock.
FRONT VIEW OF
MICROWAVE
STEP 2
1. Remove the one existing screw from the left side of the microwave oven.
2. Connect the side duct to upper duct as shown.
a) Insert projecting tabs of upper duct into holes of side duct.
b) Bend tabs up as shown.
NOTE: Remove any oil or dirt on surface of microwave oven before ducts are attached.
3. Peel off the backing of double sided tape.
Attach the side duct and upper duct assembly
on the microwave cabinet. Press down firmly on
ducts. Fasten duct assembly to left side of
cabinet with one existing screw.
Upper Duct
3 tabs
Side Duct
3 Holes
"a)"
"b)"
Existing
screw (1)
