background image

- 33 - 

Appendix No 2 

 

WHIRLPOOL INSTRUCTION CHECKLIST   

FOR VISUAL COOKING OVENS  

 

To be filled out for each installation of a WHIRLPOOL oven. 

 

In order for the oven to be qualified for warranty, this check list must be filled 

out and returned to WHIRLPOOL within 30 days of the date of instruction. 
 

Customer:_

______________________________________________            

Address:________________________________________________________ 

_______________________________________________________________ 

_______________________________________________________________ 

Tel.:_____________________________________ 

 

Fax:_____________________________________ 

E-mail address:____________________________ 

Serial no.:_________________________________ 

Instruction carried out by:__________________________________________ 

Date of instruction:_________________/_____/__________ 

 
 

(Please tick the appropriate box) 
 
The customer has been instructed in the manual use and 

programming of the oven. 

The customer has been instructed in the daily cleaning of the oven. 
The customer has been instructed in the maintenance of the oven. 

 

When the oven was handed over, it was free from any kind of defect. The 
handling, maintenance and cleaning of the oven have been explained to the 
customer. 

 

 
 

--------------------------------------- -------------------------------------- 

Signature / date – Sales person           Signature / date - Customer     

 

 

 

 

Yes   No 

Summary of Contents for Light programmable oven




































Reviews: