10
E
NSURING PROPER AIR CIRCULATION
In order to ensure proper temperatures, you need to
permit air flow between the two sections. As shown in the
illustration, cool air enters through the bottom of the
freezer section
(1)
and moves up. Most of the air then
flows through the freezer section vents
(2)
and recirculates
under the freezer floor
(3)
. The rest of the air enters the
fresh section through the top vent
(4)
.
Do not block any of these vents (1, 2, 3, or 4)
with food
packages. If the vents are blocked, air flow will be
prevented and temperature and moisture problems may
occur.
IMPORTANT:
Because air circulates between both
sections, any odors formed in one section will transfer to
the other. You must thoroughly clean both sections to
eliminate odors. To prevent odor transfer and drying out of
food, wrap or cover foods tightly. (See the “Food Storage
Guide” section for details.)
R
EMOVING THE DROP
-
IN DOOR TRIM
To remove the trim piece:
1.
Remove all items from the shelf.
2.
Pull straight up on each end of the trim piece.
To replace the trim piece:
1.
Locate each end of the trim piece above the trim
pocket opening.
2.
Push the trim ends straight down until they stop.
3.
Replace items on the shelf.
2
1
1
4
3
