1. After loading the dishwasher, turn on
the water supply tap and open the
dishwasher door.
2. Press the On button to switch the
dishwasher on. One of the programme
indicator lamps will light up.
3. Press the programme selector button
until the corresponding indicator lamp
switches on. If required, select options
(if supplied).
4. Press the Start button to start the
selected wash programme. The Start
indicator lamp will light up. Once set,
the programmed data cannot be
altered by pressing the programme
selector buttons.
Note: once the Start button has been
pressed, the dishwasher memorises the
last programme selected. This
information remains in the memory even
during interruption of the power supply.
To change the selected
programme, open the door
(caution: danger of scalding from
steam!) and press the Start button
for about 5 seconds. The Start
indicator lamp will switch off. Select
a new programme and press the
Start button again.
Note: if the dishwasher is switched off
during a wash programme, when
switched on again it will resume the wash
cycle from where it was interrupted.
Only open the dishwasher door if
strictly necessary during a wash
cycle and exercise maximum
caution. Danger of scalding from
steam.
5. To indicate the end of a programme,
an acoustic signal is activated 4 times,
the Start indicator lamp switches off
and the End indicator lamp (if fitted)
lights up (for about 30 min.).
6. Only open the door once the wash
cycle has terminated (caution: danger
of scalding from steam) and press the
OFF button to switch the dishwasher
off. All the indicator lamps switch
off.
7. Unload the lower rack before the upper
one. Close the water tap.
Upper rack
Half Load:
If the upper rack only is to be loaded, place
the cutlery basket (B) in the upper rack.
Rack height adjustment:
(The dishwasher is delivered with the
upper rack in the top position).
The rack height can also be changed
when loaded.
•
To lower: pull out the two side
handles and gently lower the rack.
•
To raise: pull up the two side handles
until the rack clicks into place.
•
The rack must be level on both sides.
Crockery holders:
•
Down: cups and long-stemmed
glasses.
•
Up: plates.
Glass holder:
Lower rack
Half Load:
Loading the lower rack only gives
greater washing power, especially for
plates and saucepans.
Plate holders:
•
(A) may be lowered to increase
available space.
Cutlery basket:
• The cutlery basket (B + C)
can be removed to increase
available space.
• It can be placed on the upper
rack (B) when the Half load
function is selected.
B
A
A
C
C
B
How to use the dishwasher
Please read the user instructions carefully.
Upper and lower rack
