hood’s vent lid. Install the cooker hood and exhaust duct
Exhaust duct
‧
Packaging materials(plastic bag
s,
polystyrene,etc) must be kept out of children’s
reach, as they are potentially dangerous.
‧
Installation must be carried out by a qualified technician.
‧
Check the voltage on the rating plate which should corresponds to the voltage in
your home.
‧
Check the following accessories before installation:
a.Exhaust duct adapter ( 6" to 6" x 1 pc, 6" to 5" x 1 pc)
b.Detachable oil cup 2 pcs, oil dish 2 pcs
c.Bulb 1 pcs
d.Warranty card 1pc
e.Instruction manual 1pc
f .Hardware 1 set
‧
Connect the power and switch on the motors and lighting system to check the
Operation.
‧
Warning
！
This appliance must be earthed
！
1. Location
：
of hood To suggest close window/door before use hood.
Air
turbulence is from
window/door may reduce the effectiveness
2. Position
：
‧
The
installation height is measured vertically from center
The minimum installation height should not be less than
of fan grille of hood to the top of the stove.
65 cm and the recommended height is 65 to 75 cm;
‧
Avoid left-right or front-dropped inclination.
3. Exhaust duct
：
‧
6-inch diameter exhaust duct is recommended to use in
order to maximize suction efficiency.In case of 5-inch
exhaust duct, an adapter as enclosed in the packaging
can be used;
‧
Before installing the hood,please apply fast drying glue to
the collar and securely attach it to the top of the cooker
to the plastic collar and seal with fast drying glue.
The smoke has to rise up to 25 cm to be within the range of
suction efficiency.
