Whirlpool Gold GSW9550KQ0 Use And Care Manual Download Page 6

6

Starting Your Washer

1.

Measure detergent and pour it into the washer. If desired, add 
powdered or liquid color safe bleach. Add extra detergent for 
the Super Wash cycle.

Drop a sorted load of clothes loosely into your washer.

Load evenly to maintain washer balance. Mix large and 
small items.

Items should move easily through the wash water. 
Overloading can cause poor cleaning.

To reduce wrinkling of permanent press clothes and some 
synthetic knits, use a large load size to provide more 
space (see step 5).

2.

(OPTIONAL STEP) Pour measured liquid chlorine bleach 
into the liquid chlorine bleach dispenser. Bleach will be 
dispensed automatically during the wash part of the cycle. 
See “SMART BLEACH™ Timed Bleach Dispenser.”

Never use more than 1 cup (250 mL) for a full load. Use 
less for a smaller load size.

Follow the manufacturer’s directions for safe use.

To avoid spilling, use a cup with a pouring spout. Do not 
let bleach splash, drip, or run down into the washer 
basket.

Use only liquid chlorine bleach in this dispenser. 

3.

(OPTIONAL STEP) Pour measured liquid fabric softener into 
the liquid fabric softener dispenser. Softener is added 
automatically during the rinse portion of the cycle.

Dilute liquid fabric softener by filling the dispenser with warm 
water until liquid reaches the crossbar in the opening.

Do not spill or drip any fabric softener on the clothes.

Use only liquid fabric softener in this dispenser.

4.

Close the washer lid.

5.

Turn the LOAD SIZE selector to the correct setting for your 
wash load and the type of fabric being washed.

Choose a load size that allows the load to move freely for 
best fabric care. See "Loading."

You may change the load size selection after the washer 
has started filling by turning the selector to a different 
setting.

Some models have a variable water level control that lets 
you select a water level anywhere from EXTRA SMALL to 
SUPER PLUS. To change to a higher water level setting 
after the washer has started to agitate, turn the knob to 
RESET, then to the desired new setting.  

Fire Hazard

Never place items in the washer that are 
dampened with gasoline or other flammable 
fluids.

No washer can completely remove oil.

Do not dry anything that has ever had any type of 
oil on it (including cooking oils).

Doing so can result in death, explosion, or fire.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Failure to follow these instructions can result in
death, fire, or electrical shock.

Do not use an extension cord.

Do not use an adapter.

Do not remove ground prong.

Summary of Contents for Gold GSW9550KQ0













Reviews: