7
Open the mains water tap (utility).
Check the level of detergent and rinse aid in the
containers.
Turn the mains power supply on/off switch on (utility).
“OFF” appears on the display to point out that the
machine is electrically powered.
Open the door/hood, fit the filters in place, and the
overflow device if supplied (versions without discharge
pump). Make sure the filters are positioned correctly, that
the impellers turn and that there are no foreign bodies in
the dishwasher.
Make sure the overflow device is fitted properly in the
discharge hole.
Close the door/hood.
Press this button
for 2 seconds; the display lights up
and “filling with water” appears to point out that the tank is
filling. This symbol
lights up yellow. Once the boiler
and tank are loaded, the temperature of the tank (L) and
boiler (R) appear on the display, indicating the last wash
cycle carried out previously.
Select the required program, by pressing
Express = 60”
Rapid = 120”
Normal = 180”
Intensive = 480” (the current cycle can be ended
whenever you want by pressing this symbol again
)
Optional cycles (not standard):
Sanitise = 180”
(with washing temperature of 65°C and thermo stop)
Beer cycle with final cold rinse = 127”
Wait for this symbol
to light up green.
Load the basket.
To start the wash cycle, press this symbol
; on hood
type dishwashers, the cycle will start automatically when
the hood is closed. Current cycle: this symbol
lights
up blue, displaying the cycle selected and the remaining
time bar. If you open the door/hood while the program is
running, the machine will stop; if you close the door/hood
again within 10 seconds, the cycle will start again,
otherwise when you close the door/hood again, the
