Using your Dehumidifer
1. Press “POWER” key to turn on the dehumidifer, lights up
2. Press 6th sense
“
MODE” key until lights up.
3. In the first time, the fan speed will set as Low in 5 seconds, after that, it will base on current humidity
to adjust the fan speed automatically.
4. Under “ 6th Sense “
mode, the fan speed will change automatically according to following conditions:
· RH% > 75% : High Fan Speed
· RH% 50%-70% : Medium Fan Speed
· RH% < 50% : Low Fan speed
5. Press “SWING” key to select vertical louver swing angle
Air fow front-up front-down
Remarks：
1 : When choosing different angle of the louver, louver will be swing to the maximum angle for 10 seconds first , and then move to the
selected option.
2 : Press the Air flow icon again, louver will stop as is.
6. If necessary, press “TIMER” key to adjust the operation duration 1-24 hours or CO(continuous).
7. If necessary, press “Humidity” key to adjust the humidity level.
Remarks :
•
Under 6th Sense mode, fan speed cannot be adjusted.
Machine will stop under following situation:
•
When the water tank is full (P. 42)
• When the
temperature or humidity is out of operation range (P. 37)
• Press" CO " (continuous), the unit will stop automatically after 48 hours operation. If water
tank was taken out during operation , the counting time will start over again.
6th Sense Mode
Laundry Mode
2. Press “ DEHUMIDITY MODE” key until lights up.
3. Under Laundry Mode, the Display will show "--" and cannot set the humidity. Under this mode, the fan
speed operates at high speed, auto swing at maximum
and will stop automatically after 10 hours operation.
4. Press “SWING” key to select vertical louver swing angle
Air
fow front-up
front-down
Remarks
：
1 : When choosing different angle of the louver, louver will be swing to the maximum
angle for 10 seconds first ,
and then move to the
selected option.
2 : Press the Air flow icon again, louver will stop as is.
5. If necessary, press “TIMER” key to adjust the operation duration as
1-24 hours or CO (continuous).
Under Laundry Mode:
• Humidity and timer cannot be set .
• "
R
E
Z
I
N
O
I
" function can be turned on.
• Fan Speed cannot be adjusted.
Machine will stop under following situation:
• When the water tank is full (P.42)
• After
operation for 10 hours.
•
When the temperature or humidity is out of operation range ( P. 37 )
• Press "CO"(continuous), the unit will stop automatically after 48 hours operation. If water tank
was taken out during operation , the counting time will start over again.
1. Press “POWER” key to turn on the machine, lights up.
39
