Whirlpool DDLX 70113, Health & Safety, Use & Care And Installation Manual

Page: 29 / 36

29
EN
FAILURE INDICATOR AND MESSAGES
Make sure to
• Empty the water tank after each programme
• Clean the door filter after each programme
• Clean the bottom filter about every two months
Refer to section CARE AND MAINTENANCE for
emptying water tank or cleaning filters .
Failure Indicator Possible Cause Solution
The empty “Water Tank” lights on Water tank may be
• filled with water • Empty water tank; make sure to
insert it properly afterwards .
• not correctly positioned • Push in the water tank to make
sure that it is correctly inserted in
the tank compartment .
The “Bottom Filter” lights on Bottom filter may be
• blocked by lint • Clean the bottom filter;
make sure to insert it properly
afterwards
• not correctly positioned • Push in the bottom filter and
move the release levers into
vertical position, to make sure
that the filter is correctly inserted
in the filter compartment . Close
the flap .
The “Door Filter” lights on Door filter may be
• blocked by lint • Remove and clean the door
filter; make sure to insert it
properly afterwards so that it
completely integrates in the filter
compartment .
• not correctly positioned • Check position of the door
filter; make sure that it is properly
inserted in the filter compartment .