background image

GB

AZA-HP 8681

Quick Reference Guide

Before using the machine, please also read the Instructions For Use carefully!

5

Indicator lamps

Programme selector knob

The drying programme is selected by 

turning this knob. The 

“Start 

(Pause)”

 indicator lamp flashes.

“Start (Pause)” button

The drying programme is started by 

pressing this button. The indicator lamp 

lights up.

Door filter

The indicator lamp lights up when the 

door filter needs to be cleaned.

Clean the door filter at the end of 

every drying cycle.

Bottom filter

This indicator lamp lights up when the 

bottom filter needs to be cleaned.

This indicator lamp is blinking, when the 

bottom filter is not correctly positioned.

Please take care that the bottom filter is 

correctly inserted and the handle is fully 

engaged. 

Water container

The indicator lamp lights up when the 

water container needs to be emptied. 

The drying cycle is automatically 

interrupted. Empty the container and 

restart the drying program. 

Empty the water container after 

every drying cycle.

“Remaining time” display

Depending on the programme selected 
a default drying time is displayed. After 
start of cycle the time displayed is 
corrected depending on the volume, 
type and moisture of the laundry.

The drying time specified is a 
calculated value which will be 
updated during the drying cycle.

The flashing lines indicate that the 
calculation is running. The remaining 
time will be updated.

End

The drying programme is finished. 
Please unload the dryer.

Overdry protection / 6

th

 Sense

The indicator lights up when a humidity 
controlled programme is selected, to 
indicate the activated protection function.

Key lock

For child protection reasons, this 
option can be used to lock all functions 
of the user interface.
To activate/deactivate this option, the 
button needs to be pressed for 3 seconds. 
The only remaining function is the “Off” 
position at the programme selector knob.
The key lock function is still active even 
when the selector knob is turned to 
“Off” position or the door is opened. 
The function has to be deactivated.

Summary of Contents for AZA-HP 8681







Reviews: