background image

5019 307 00485

GB

AWZ 9993

Quick Reference Guide

Before using the machine, please also read the instructions for use carefully!

(Subject to technical modifications)

Whirlpool is a registered trademark of Whirlpool USA

Programme selector knob

The drying programme is selected by turning 
this knob.

}²¥¶®¬q¥¤·¬

button

The drying programme is started by pressing 
this button. The indicator lamp flashes during 
the selection phase and lights up during 
drying.

Indicator lamps

Filter

The indicator lamp lights up when the filter 
and/or heat exchanger need cleaning.
Clean the filter at the end of every cycle.

Water container

The indicator lamp lights up when the water 
container needs to be emptied. The drying 
cycle is automatically interrupted. Empty the 
container and restart the drying programme.
Empty the water container after every 
drying cycle
.

Time remaining display

Depending on the programme selected, once 
the drying cycle has been started, a default 
drying time is displayed. The time displayed is 
corrected by a few minutes depending on the 
volume, type and dampness of the laundry.
The drying time specified is a calculated 
value which will be updated during the 
drying programme.

Overdry Protection 

The indicator lamp lights up when a humidity 
controlled programme is selected, to indicate 
the working protection function. Function is 
not active in time controlled programmes 

20' 

40' 60'

 and Airing “

”. 

Programme sequence

6

th 

Sense

Drying

End 

of cycle

Anti-

crease

Options

Gentle

Reduces drying intensity 
(recommended for delicate items).

Rapid

Shortens drying duration (recommended for 
thin items of the same size).

Buzzer

Signals/sounds end of drying cycle.

Anti-crease

Prevents laundry from creasing up to 12 
hours. Buzzer and Anti-crease cannot be 
selected together.

Delayed Start

Delays the start of the drying cycle by 1 to 12 
hours.
Each time the button is pressed, the start 
time is delayed by 1 hour. 
Then press the 

}²¥¶®¬q¥¤·¬

 button to 

confirm the final selection and to start the 
dryer. 
The delayed start indicator lamp flashes and 
the countdown counts down in 1-hour 
intervals. The countdown is indicated by the 
indicator lamp above the button flashing. 
During the countdown, the drum will turn 
from time to time to re-distribute the 
laundry. To cancel or change the previously 
set time delay, set the programme selector 
knob to 

 or open the door.

+

Summary of Contents for AWZ 9993

Page 1: ...f the laundry The drying time specified is a calculated value which will be updated during the drying programme Overdry Protection The indicator lamp lights up when a humidity controlled programme is selected to indicate the working protection function Function is not active in time controlled programmes 20 40 60 and Airing Programme sequence 6th Sense Drying End of cycle Anti crease Options Gentl...

Page 2: ...e again press the q button Interrupting programme To interrupt the dryer during the drying cycle set the programme selector knob to and press the q button Wait at least 5 minutes before opening the door to allow the dryer to cool down For your safety the drying cycle stops automatically if you open the door To restart after door opening close the door and press the q button again End Take the laun...

Page 3: ...shirts polo shirts work clothes 3 0 6 0 X X X X X 60 110 50 85 Cupboard dry Laundry with thick multi layered areas such as bed and table linen track suits anoraks blankets Synthetic mixed fibre or cotton easy care ironing not required laundry Max 2 5 kg 1 0 2 5 X X X X 30 55 25 45 Cupboard dry Laundry which does not require ironing such as shirts blouses T shirts sportswear 1 0 2 5 X X X X 25 45 2...

Page 4: ...e the END and Anti crease indicator lamps lighting up The drying cycle is complete and the laundry can be taken out The dryer will not operate after a power failure always press the q button Is the plug properly inserted into the mains electricity socket Is there a power failure Has the fuse blown Is the door properly closed Has a drying programme been selected Has the q button been pressed Lint f...

Reviews: