background image

5019 307 01088

GB

AWZ 3520

Quick Reference Guide

Before using the machine, please also read the instructions for use carefully!

(Subject to technical modifications)

Whirlpool is a registered trademark of Whirlpool USA

4

Programme selector knob

The drying programme is selected by turning 
this knob.

“Start (Pause)” button

The drying programme is started by pressing 
this button. The indicator lamp flashes during 
the selection phase and lights up during 
drying.

Indicator lamps

Filter

The indicator lamp lights up when the filter 
needs cleaning.
Clean the filter at the end of every cycle.

Time remaining display

Depending on the programme selected, once 
the drying cycle has been started, a default 
drying time is displayed. The time displayed is 
corrected by a few minutes depending on the 
volume, type and dampness of the laundry.
The drying time specified is a calculated 
value which will be updated during the 
drying programme.

The flashing lines indicate that the calculation is 
running. The remaining time will be updated.

Overdry protection

The indicator lamp lights up when a humidity 
controlled program is selected, to indicate 
the working protection function. Function is 
not active in time controlled programmes 
20’, 30’, 40’, 60’, 90’ and “

”.

Programme sequence

Overdry

protection

Drying

Anti-

crease

End 

of cycle

Options

Gentle

Reduces drying intensity (recommended for 
delicate items).

Rapid Cotton

Shortens drying duration (recommended for 
thin items of the same size).

Buzzer

Signals/sounds end of drying cycle.

Anti-crease

Prevents laundry from creasing up to 12 
hours. Buzzer and Anti-crease cannot be 
selected together.

Delayed Start

Delays the start of the drying cycle by 1 to 12 
hours. Each time the button is pressed, the 
start time is delayed by 1 hour. 
Then press the “Start (Pause)” button to 
confirm the final selection and to start the dryer.
The delayed start indicator lamp flashes and 
the countdown counts down in 1-hour 
intervals. The countdown is indicated by the 
indicator lamp above the button flashing. 
During the countdown, the drum will turn 
from time to time to re-distribute the 
laundry. To cancel or change the previously 
set time delay, set the programme selector 
knob to “

” or open the door.

+

Summary of Contents for AWZ 3520

Page 1: ...terrupt a drying cycle press the Start Pause button and open the door Wait at least 5 minutes to allow the laundry to cool down before you unload the dryer For your safety the drying cycle stops automatically if you open the door To restart after door opening close the door and press the Start Pause button again Warning Never stop a tumble dryer before the end of the drying cycle unless all items ...

Page 2: ...s 3 0 7 0 X X X X X 60 130 50 100 Laundry with thick multi layered areas such as bed and table linen track suits anoraks blankets Synthetic mixed fibre or cotton easy care ironing not required laundry Max 3 5 kg 1 0 3 5 X X X X 30 85 25 75 Laundry which does not require ironing such as shirts blouses T shirts sportswear 1 0 3 5 X X X X 25 60 20 50 Laundry which requires ironing such as trousers dr...

Page 3: ...he laundry can be taken out If the drying result does not meet your expectation select a more dry programme The dryer will not operate after a power failure always press the Start Pause button Is the plug properly inserted into the mains electricity socket Is there a power failure Has the fuse blown Is the door properly closed Has a drying programme been selected Has the Start Pause button been pr...

Page 4: ...ng time will be updated Overdry protection The indicator lamp lights up when a humidity controlled program is selected to indicate the working protection function Function is not active in time controlled programmes 20 30 40 60 90 and Programme sequence Overdry protection Drying Anti crease End of cycle Options Gentle Reduces drying intensity recommended for delicate items Rapid Cotton Shortens dr...

Reviews: