background image

 

overheated oil can burst into flame. 
* The hood should not be used by children or person not instructed 
on its correct usage. 
 

MAINTENANCE 

*  Proper  maintenance  of  the  Range  Hood  will  assure  proper 
performance of the unit.

 

* Disconnect the hood from the main supply before carrying out any 
maintenance work. 
* Clean and/or replace grease filters after specified period of time. 
* Clean the hood using a damp cloth and a neutral liquid detergent. 
*  DISPOSAL:  Do  not  dispose  this  product  as  unsorted  municipal 
waste. Collection of such waste separately for special treatment is 
necessary. 

 

WARNING!! 

In  certain  circumstances  electrical  appliances  may  be  a  danger 
hazard. 
*  Do  not  check  the  status  of  the  filters  while  the  cooker  hood  is 
operating.   
* Do not touch the light bulbs during/ immediately after appliance 
use. 
* Do not disconnect the appliance with wet hands. 
* Avoid naked flame, as it may damage the filters and a fire hazard. 
* Constantly check a frying food to avoid that the overheated oil may 
become a fire hazard.   
* Disconnect the electrical plug prior to any maintenance. 
*  Children  don’t  recognize  the  risks  of  electrical  appliances. 
Therefore use or keep the appliance only under supervision of adults 
and out of the reach from children. 
* Don’t use this product outdoor. 
* This appliance is not intended for use by persons (including 
children) with reduced physical, sensory or mental capabilities, or 
lack of experience and knowledge, unless they have been given 

Summary of Contents for AKR3000/IX















Reviews: