5019 318 33058
AKR 998
Cleaning the grease filter - Fig. 1
Wash the grease filter at least once a month, or whenever
the display shows the letter
F
.
1.
Disconnect the electrical power supply.
2.
Remove the grease filters: push the handles back (
a
),
and then downwards (
b
).
3.
After cleaning the grease filter refit in reverse order,
making sure the entire extraction surface is covered.
4.
Reset filter saturation indicator - press and hold
button 1 (see control panel) for at least 3 seconds.
Replacing bulbs - Fig. 2
1.
Disconnect the electrical power supply.
2.
Using a screwdriver or any other suitable tool, prise off
the lamp cover (
c
).
3.
Remove the burnt-out bulb.
Use 20 W max halogen bulbs only, making sure not to
touch them with your hands.
4.
Close the lighting unit (snap-close).
Carbon filter Fitting and Maintenance
1.
Disconnect the electrical power supply.
2.
Remove the grease filters (
a,b - Fig. 1
).
3.
Fit the carbon filter by fixing it with the two screws
supplied (
d - Fig. 3
).
4.
If the carbon filter needs renewing, remove the old
filter and fit a new one.
Change the carbon filter at least once a year and, in any
event, every time the carbon filter saturation indicator
flashes
C
.
5.
Refit the grease filters.
6.
Reset filter saturation indicator - press and hold
button 1 (see control panel) for at least 3 seconds.
Fig. 1
Fig. 2
Fig. 3
D
F
NL
E
GB
P
I
GR
31833058.fm Page 6 Wednesday, October 30, 2002 6:20 PM
