5019 318 33220
1. Control panel.
Light :
move the switch to the right or press the button to switch
on.
Extraction speed
:
move the switch to the right or press the next button to
increase extraction speed (or open the electric shutter)
.
2. Grease filters.
3. Lamp covers
(or halogen lamps, depending on the model).
4. Telescopic flue.
Grease filters:
Metal grease filters have an unlimited
life and should be washed once a month
either by hand or in a dishwasher at a
low temperature and with a short cycle.
Washing in a dishwasher can cause
grease filters to turn white, but this in
no way affects efficiency.
a.
Press the handle to release the filter
b.
Remove the filter.
Wash the filter and leave it to dry, proceeding in reverse
order to refit it.
Bulb/s:
Remove the filters and remove the
burnt-out bulb.
Refit the filters.
Halogen lamps:
Use a small screwdriver or other suitable
tool to prise off the cover. Snap-fit the
cover back on.
Use only max 40 W - E14 bulbs or
max 20 W halogen bulbs (depending on the model),
taking care not to touch them with your hands.
Fitting or replacing the carbon filter
(filter hoods only).
Change the carbon filter every six months.
1. Remove the grease filters.
2. Fit the filter/s over the motor
according to the model:
• Align the
pins R
on the cowl with the
slots S
, then
turn the filter clockwise until it locks in place or
• turn the central handle clockwise.
3. Reverse the above procedure to remove the carbon
filter.
4. Refit the grease filters.
Or
* Only present on some models
4
2
3
3
1
a
b
