Important: the programmer symbols are given as an indication
only; for correct operation of the programmer, follow the
instructions and illustrations given on these pages.
CONTROL BUTTONS AND SYMBOLS
1. Button used to select minute minder with acoustic signal
2. Button used to set the cooking duration
3. Button used to set the end-of-cooking time
4. Button used to select manual operation
5. Button used to set or change data
6. Button used to set or change data
AUTO:
when permanently alight, indicates operation of the
oven in automatic mode.
AUTO:
will also blink to confirm end-of-cooking, prompt
further programming or indicate a wrong selection.
indicates that the oven is in operation and enabled in
manual mode.
indicates operation of the minute minder.
SETTING THE CLOCK, AND SELECTING MANUAL OPERATION
When the appliance is installed new, or following a power
failure, digits
0:00
and the
AUTO
symbol will blink in the
display. All other functions remain inhibited.
Press and hold buttons
2
and
3
simultaneously, and set the
clock using buttons
5
and
6.
To operate the oven manually, press button
4
: the
symbol
will be displayed.
USING THE MINUTE MINDER WITH ACOUSTIC SIGNAL
This function is independent of oven operation
•
Press button
1
: digits
0:00
are displayed
•
Press button
5
or
6
to display the desired cooking time.
Having released the buttons, or a few seconds afterwards, the
actual time and the
symbol are displayed.
The acoustic signal warns that the set time has elapsed.
Press button
1
to silence the acoustic signal.
PROGRAMMING THE COOKING TIME
Press button
2
: digits
0:00
are displayed; set the desired
cooking time with buttons
5
and
6
. After a few seconds, the
actual time is displayed with
AUTO
and the
symbol both
permanently alight.
•
Set the oven control knob to the temperature required:
the oven will come into operation immediately.
•
Once the cooking time has elapsed, an acoustic
signal indicates that the oven has switched off.
Return the oven control knob to position
“0”
, then press
button
4
to silence the acoustic signal.
Note: the time remaining until end-of-cooking can be checked
or altered at any moment by pressing button
2
.
The end-of-cooking time can also be displayed by pressing button
3.
USING THE PROGRAMMER
PROGRAMMING DURATION AND END OF COOKING TIME
•
Press button
2
: digits
0:00
are displayed; set the
desired cooking time with buttons
5
and
6
. After a
few seconds, the actual time is displayed with
AUTO
and the
symbol both permanently alight.
•
Press button
3
to set the end of cooking time,
which is selected using buttons
5
and
6
. The
symbol will now go out, and reappear again when
the oven comes into operation automatically at the
start of the programmed duration.
•
Set the oven control knobs to the temperature and
functions required.
•
Once the cooking time has elapsed, an acoustic
signal indicates that the oven has switched off.
Return the oven control knob to position
“0”
, then press
button
4
to silence the acoustic signal.
USING THE PROGRAMMER
