19
4.
Remove 2 screws from the front tabs of the flame spreader. Lift
front of the flame spreader and pull forward to remove tabs
from rear of oven and set it aside on a covered surface.
5.
Remove 2 screws from the bake burner.
6.
Slide the front of the bake burner to the side to remove tab from
front of oven. Lift the back of the bake burner off the oven
orifice, and set the bake burner aside.
7.
Use a
³⁄₈
" nut driver or combination wrench and turn the LP gas
bake burner orifice spud counterclockwise to remove. The
spud will be stamped with a “57.”
8.
Replace the “57” spud with a “49” spud. Install the Natural gas
bake burner orifice spud, turning it clockwise until snug.
IMPORTANT:
Do not overtighten.
9.
Position the back of the bake burner over the oven orifice, and
slide the tab on front of the bake burner into the front of the
oven.
10.
Reattach the bake burner with 2 screws.
11.
Insert the tabs on the rear of the flame spreader into the rear of
the oven.
12.
Reattach the front tabs of the flame spreader to the oven with
2 screws.
13.
Position the front of the oven bottom panel toward the front
frame and lower the rear of the oven bottom panel into the
oven.
14.
Reattach the oven bottom panel with 2 screws.
To Convert Oven Broil Burner (LP Gas to Natural Gas)
1.
Remove the screw from the broil burner.
2.
Remove the broil burner from the broil burner orifice hood.
NOTE:
The broil burner will hang in the back of the oven while
you are changing the orifice hood.
3.
Use a
³⁄₈
" combination wrench and turn the LP gas broil burner
orifice hood counterclockwise to remove. The hood will be
stamped with a “090.”
4.
Replace the “090” hood with a “53” hood. Install the Natural
gas broiler burner orifice hood, turning it clockwise until snug.
IMPORTANT:
Do not overtighten.
A. Screws
B. Flame spreader
A. Screws
B. Bake burner
A. Orifice spud
A
B
A
A
B
A
A. Broil burner
B. Screws
C. Orifice hood
A. Orifice hood
B
C
A
x.xx
A
