Quick Reference Guide
Also refer to the “Dishwasher Loading Instructions” which contain detailed information and useful tips.
GB
H O W T O U S E T H E D I S H W A S H E R
Close the dishwasher door and turn
on the water tap.
1. Select the programme required by
turning the programme selector knob.
If required, select any additional
functions.
2. Pull out the programme selector knob
to start the programme.
3. To change the previously selected
programme push in the programme
selector knob to stop the programme.
Turn the programme selector knob
clockwise to the required programme.
Pull out the programme selector knob
to start the programme. If required,
select any additional functions.
Note: If the dishwasher is switched off
during a wash programme, when
switched on again the dishwasher
resumes the wash cycle from where it
was interrupted.
4. To switch the dishwasher off turn the
programme selector knob clockwise
to the Stop position and push it in.
Open the door and unload first the
lower rack, then the upper one.
Upper rack
Lower rack
Height adjustment with empty rack
only:
•
Release the caps of the rack rails.
•
Take the rack out and re-insert it using
either the upper or lower roller pairs as
required.
•
Close the caps.
Crockery Holders:
•
Down: two tiers of cups.
•
Up: long-stemmed glasses.
Plate Holder:
•
The plate holder may be removed to
increase available space.
•
To remove the plate holder pull the
handle up.
•
To reposition the plate holder, insert it
in its original position.
Cutlery Basket:
•
Removable to gain space.
