13
The rinse aid facilitates drying and prevents the
formation of unsightly spots and streaks on
crockery. Before using the dishwasher for the
first time, fill the rinse aid dispenser.
Thereafter, regularly check the rinse aid level.
Only use rinse aids recommended for use in
domestic dishwashers.
1. Open the rinse aid dispenser by turning knob
A counter-clockwise (see diagram) and
pulling it out.
2. Fill with rinse-aid until the visual indicator B
turns dark.
3. Close the rinse aid dispenser.
4. Immediately wipe away any spilt rinse aid
(from metal parts as well) to prevent
excess suds which may spoil washing
results.
How to adjust the rinse aid dosage
regulator.
(Open the cover and close again following
adjustment).
Factory setting: 3.
If you are not satisfied with washing or drying
results, change the dial setting with a spoon
handle or coin.
If crockery is prone to whitish streaks, reduce the
dosage by turning the dial to a lower setting. If
instead crockery is wet, increase the dosage by
turning the dial to a higher setting.
Rinse aid level indicator
light = empty
dark = full.
Only use detergents recommended for use in
domestic dishwashers.
If you use detergents in pellet form, follow the
manufacturer’s directions for use.
Always use the recommended dosage stated on
the detergent pack. The use of detergent in
excess of the recommended dosage may cause
pollution. The recommended dosage varies
between different brands.
Only fill the detergent dispenser prior to
starting a wash programme.
For programmes with pre-rinse:
1. Open the detergent dispenser lid.
2. Pour two thirds of the recommended dosage
into the inner compartment A.
3. Pour the remaining third into the small
compartment B.
Note: Remember to close the lid.
For programmes without pre-rinse:
•
Pour the entire recommended dosage into
the wider compartment. Adjust detergent
quantity between Min and Max according to
the wash load.
Note: Remember to close the detergent
dispenser lid.
HOW TO FILL THE RINSE AID DISPENSER
HOW TO FILL THE DETERGENT DISPENSER
