background image

GB -4-

How to load the racks

D - OPEN

LOWER RACK - depending on the model

4

A - Adjustable flaps (2 or 4): in horizontal position for 

cups / long utensils / stemmed glasses.

B - Cutlery basket: can be placed in the upper rack when 

the “Half load/Multizone” option is selected.

The Grid (F) should be removed.

How to adjust upper rack height (if available).
It could be useful to lift up the upper rack to have 

more space in lower rack or bring it down to load 

long stem glasses.
- Grasp and take out the two lateral handles (C)  

(they must be on the same level) and lift up or take 

down the upper rack.

Arrange crockery so that water does not collect in cavities, ensuring that the spray arms turn freely. Only use dishwasher-proof crockery and dishes. Do not use the dishwasher for washing wooden 

items, aluminium, tin, silver cutlery or decorated crockery (unglazed). In the baskets, dishes (e.g. plates, bowls, pots) must be placed in a correct way to let water flow down!

D - CLOSED

How to remove the upper rack (if available) 
It could be useful to remove the upper rack to load bulky items in the lower rack.
- Open the two retainers (D) to take off the upper rack (when the upper rack is in 

place the retainers must always be closed).

A

CLICK!

Rotate the flap

clockwise and

hook on rack

A

B

FF

E

E

H

G

E - Cutlery Basket.
F - Grid: helps to keep the cutlery separate for better washing results.
G - Vertical plate holders: they can be folded down to load pot.
H - Lateral support with foldable flaps (if available): shelves can be used to hold 

long tools or cups onto.

CLICK!

THE LATERAL SUPPORT CAN BE REMOVED: Pull the support 

to the front of the basket and lift to remove it.

A - OPEN

A - CLOSED

TO OPEN A:

UPPER RACK - depending on the model

5

Switching on the appliance. Press any button (except CANCEL/Off button) to switch on the control panel and start programming.

Summary of Contents for ADP 5300 SL









Reviews: