background image

6

4. PRECAUTIONS AND GENERAL RECOMMENDATIONS

1. Packaging

The packaging materials are 100% recyclable and marked with the recycling symbol 

.

2. Removing the packaging and inspecting the contents

After unpacking, make sure that the dishwasher has not been damaged during shipping and that the door closes 
correctly. If in doubt, contact a qualified technician or your local retailer.

3. Before using the dishwasher for the first time

-

The appliance is designed to operate at ambient temperatures of between 5°C and 45°C.

-

This dishwasher has been tested by the manufacturer to ensure it functions correctly. Such testing may leave slight 
drips/water marks which will disappear with the first wash.

4. Energy and water savings

-

Do not rinse crockery under running water.

-

Always fully load the dishwasher before running it or select the “Half load/Multizone” function (if available).

-

If ecological energy sources are available such as solar panel heating, heat pumps or centralised heating systems, 
the appliance may be connected to the hot water mains up to a maximum temperature of 60°C. Make sure the 
water inlet hose is of the correct type (“70°C Max” or “90°C Max”).

5. Child lock

-

Keep the packaging materials out of the reach of children.

-

Children must not be allowed to play with the dishwasher.

-

Store the detergent, rinse aid and salt out of the reach of children.

6. Safety warnings

-

The appliance is not intended for use by children or physically or mentally impaired persons, unless adequately 
supervised by a responsible adult capable of guaranteeing safe use of the appliance.

-

Do not operate the appliance in the open air.

-

Do not store flammable materials in close proximity to the dishwasher.

-

The water in the dishwasher is not potable.

-

Do not use solvents inside the dishwasher: 

risk of explosion!

-

Be careful when the door is open: 

risk of tripping!

-

The open dishwasher door can only support the weight of the loaded rack when pulled out. Do not rest objects on 
the open door or sit or stand on it.

-

Sharp items that might cause injury (e.g. knives), must be placed in the cutlery basket (where present) with the 
sharp end facing downwards. Long-handled utensils must be arranged horizontally in the upper rack, with the 
sharp end facing away from the front of the appliance.

-

Before cleaning or carrying out maintenance, or in the event of a fault, unplug the appliance and turn off the water tap.

-

Repairs and technical modifications must be carried out exclusively by a qualified technician.

7. Resistance to frost

If the appliance is placed in surroundings exposed to the risk of frost, it must be drained completely. 
Turn off the water tap, remove the inlet and outlet hoses, and let all the water run out. Make sure there is at least 1 kg 
of dissolved regeneration salt in the salt reservoir to protect the appliance at temperatures of up to -20°C. When the 
program resumes, an error message may be displayed when it switches on: 
“F6/E2” or the Cancel/Off light flashes “6 times/2 times”: the appliance must remain at an ambient temperature 
of at least 5°C for at least 24 hours.
After eliminating these faults, do a RESET (see Section “5. What to do, if...”).

8. Disposing of packaging and old machine

-

The appliance is manufactured using recyclable materials. If you decide to scrap the dishwasher, it must be 
disposed of in compliance with local waste disposal regulations. If necessary, make it unusable by cutting off the 
power cord. To prevent situations of potential danger to children (e.g. danger of suffocation), break the lock of the 
door so that it can no longer be closed.

-

This appliance is marked according to the European Directive 2002/96/EC on Waste Electrical and Electronic 
Equipment (WEEE). By ensuring this product is disposed of correctly, you can help prevent potential negative 
consequences for the environment and human health. Unsuitable disposal of an appliance of this type as household 

waste could have detrimental effects on the environment. The symbol 

 on the appliance or accompanying 

documentation. indicates that this appliance must not be handled as normal household waste, but must be taken to 
the nearest collection centre for the recycling of electrical and electronic appliances. Disposal must be carried out 
in accordance with local environmental regulations for waste disposal. For further information on the treatment, 
recovery and recycling of this appliance, contact your competent local authority, the collection service for 
household waste or the shop where you purchased the appliance.

EC Declaration of conformity

This appliance has been designed, constructed and distributed in compliance with the safety requirements of EC Directives:
2006/95/CE, 89/336/CE, 93/68/CE and 2002/95/CE (RoHS Directive).

Load capacity:

 12 place settings.

Summary of Contents for ADG 7542

















Reviews: