background image

EN -3-

Daily check

3

Check the rinse aid indicator to check the level 

into the dispenser.

(depending on the model)
Rinse aid indicator on the control panel

Rinse aid indicator on the dispenser

The indicator lamp lights up when RINSE AID NEEDS 

TO BE ADDED.

dark: OK.

clear: NEEDS TO BE ADDED

Only use rinse aids recommended for use in domestic dishwashers. Immediately wipe away any rinse aid spilt accidentally. This prevents the formation of excess suds which can cause a fault function of the 

appliance.

If there are streaks: reduce the dosage by turning the dial to a lower setting (1-3). If crockery is not perfectly dry: increase the dosage by turning the dial to a higher setting (5-6). Plastic dishes have more difficulty 

drying and a higher rinse aid setting will not improve the situation.

Detergents with rinse aid incorporated may be effective only with longer programs. In the case of shorter programs, detergent residue may be a problem (if necessary, use powder detergent). Detergents with 

rinse aid incorporated tend to form excess suds.

Daily use

Adding detergent - Use only detergent specifically for dishwashers in accordance with the supplier’s recommendations

Open the cover A 

(press the dedicated button).

Only fill the 

detergent dispenser 

prior to starting a 

wash program.

Shut the cover 

by pressing dedicated ribs.

Insert detergent: Tablet / powder / liquid into the big chamber

Use only one tablet per one cycle, only 

placed in detergent dispenser.

All types of tablets can be used, but for 

2 in 1 type adding of salt is mandatory.

If required, 

open the 

cover B 

(press the 

dedicated 

button).

Add rinse aid 

to the max. 

line ~150 ml

The rinse aid dosage can be 

adjusted to the detergent used. 

The lower the setting, the less 

rinse aid is dispensed (factory 

setting: position 4).

Press the button to open the 

cover B. Using a coin or similar 

object, turn the arrow to the 

desired setting. After adjusting 

the rinse aid setting, shut the 

cover again.

Visual 

indicator

2

Adding rinse aid (not necessary when you use tablets). How to adjust the rinse aid dosage regulator

Summary of Contents for ADG 6600









Reviews: