20
Cleaning the Spray Arms
It is necessary to clean the spray arms regularly for hard water chemicals
will clog the spray arm jets and bearings.
To remove the upper spray arm, hold the nut, rotate the arm clockwise
to remove it.
To remove the lower spray arm, pull out the spray arm upward.
Wash the arms in soapy and warm water and use a soft brush to clean the
jets. Replace them after rinsing them thoroughly.
How to Keep Your Dishwasher in Shape
• After Every Wash
After every wash, turn off the water supply to the appliance and leave the door slightly open so that
moisture and odours are not trapped inside.
• Remove the Plug
Before cleaning or performing maintenance, always remove the plug from the socket.
• No Solvents or Abrasive Cleaning
To clean the exterior and rubber parts of the dishwasher, do not use solvents or abrasive cleaning
products. Only use a cloth with warm soapy water. To remove spots or stains from the surface of the
interior, use a cloth dampened with water and a little vinegar, or a cleaning product made specifically
for dishwashers.
• When not in Use for a LongTime
It is recommend that you run a wash cycle with the dishwasher empty and then remove the plug from
the socket, turn off the water supply and leave the door of the appliance slightly open. This will help
the door seals to last longer and prevent odours from forming within the appliance.
• Moving the Appliance
If the appliance must be moved, try to keep it in the vertical position. If absolutely necessary, it can be
positioned on its back.
• Seals
One of the factors that cause odours to form in the dishwasher is food that remains trapped in the
seals. Periodic cleaning with a damp sponge will prevent this from occurring.
Open
