background image

27

Display shows messages

Is the display showing “PF” or flashing a time?
There has been a power failure. Clear the display. See 
“Display(s)” section. On some models, reset the clock, if 
needed. See “Clock” section.

Is the display showing a letter followed by a number?
Depending on your model, press OFF/CANCEL, OFF or 
CANCEL/OFF to clear the display. See “Display(s)” section. If 
it reappears, call for service. See “Assistance or Service” 
section.

Self-Cleaning cycle will not operate

Is the oven door open?
Close the oven door all the way.

Has the function been entered?
See “Self-Cleaning Cycle” section.

On some models, has a delay start Self-Clean cycle 
been set?
See “Self-Cleaning Cycle” section.

Has a delay start been set?
See “Timed Cooking” section.

Oven cooking results not what expected

Is the appliance level?
Level the appliance. See the Installation Instructions.

Is the proper temperature set?
Double-check the recipe in a reliable cookbook.

Is the proper oven temperature calibration set?
See “Oven Temperature Control” section.

Was the oven preheated?
See the “Baking and Roasting” and “Broiling” sections.

Is the proper bakeware being used?
See “Bakeware” section.

Are the racks positioned properly?
See “Positioning Racks and Bakeware” section.

Is there proper air circulation around bakeware?
See “Positioning Racks and Bakeware” section.

Is the batter evenly distributed in the pan?
Make sure batter is level in the pan.

Is the proper length of time being used?
Adjust cooking time.

Has the oven door been opened while cooking?
Oven peeking releases oven heat and can result in longer 
cooking times.

Are baked items too brown on the bottom?
Move rack to higher position in the oven.

Are pie crust edges browning early?
Use aluminum foil to cover the edge of the crust and/or 
reduce baking temperature.

ASSISTANCE OR SERVICE

Before calling for assistance or service, please check 
“Troubleshooting.” It may save you the cost of a service call. If 
you still need help, follow the instructions below.

When calling, please know the purchase date and the complete 
model and serial number of your appliance. This information will 
help us to better respond to your request.

If you need replacement parts

If you need to order replacement parts, we recommend that you 
use only FSP

®

 

replacement parts. FSP

®

 replacement parts will fit 

right and work right because they are made with the same 
precision used to build every new WHIRLPOOL

®

 

appliance. 

To locate FSP

®

 replacement parts in your area, call us or your 

nearest Whirlpool designated service center.

Call the Whirlpool Customer eXperience Center 
toll free: 1-800-253-1301.

Our consultants provide assistance with:

Features and specifications on our full line of appliances.

Installation information.

Use and maintenance procedures.

Accessory and repair parts sales.

Specialized customer assistance (Spanish speaking, hearing 
impaired, limited vision, etc.).

Referrals to local dealers, repair parts distributors, and 
service companies. Whirlpool designated service technicians 
are trained to fulfill the product warranty and provide after-
warranty service, anywhere in the United States.

To locate the Whirlpool designated service company in your 
area, you can also look in your telephone directory Yellow 
Pages.

For further assistance

If you need further assistance, you can write to Whirlpool 
Corporation with any questions or concerns at:

Whirlpool Brand Home Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022-2692

Please include a daytime phone number in your correspondence.

Accessories U.S.A.

To order accessories, call the Whirlpool Customer eXperience 
Center toll free at 1-800-442-9991 and follow the menu prompts. 
Or visit our website at www.whirlpool.com and click on “Buy 
Accessories Online.”

Stainless Steel Cleaner & Polish

(stainless steel models)

Order Part Number 31462

All-Purpose Appliance Cleaner

Order Part Number 31662

Gas Grate and Drip Pan Cleaner

Order Part Number 31617

Summary of Contents for 9762365





























Reviews: