Whirlpool 8559 Instructions For Use Manual Download Page 3

GB 3

PRECAUTIONS AND GENERAL 
RECOMMENDATIONS

1.Safety instructions

• The washing machine is appropriate for indoor 

use only.

• Do not store flammable fluids near the appliance.
• Children must be supervised to ensure that they 

do not play with the appliance.

• This appliance is not intended for use by persons 

(including children) with reduced physical, sensory 
or mental capabilities, or lack of experience and 
knowledge, unless they have been given 
supervision or instruction concerning use of the 
appliance by a person responsible for their safety.

• Do not operate the washing machine at 

temperatures below 5°C.

• If you want to place a dryer on top of your 

washing machine, first contact our After-Sales 
Service or your specialist dealer to verify if this is 
possible. This is only admitted if the dryer is fixed 
on the washing machine by using an appropriate 
stacking kit available through our After-Sales 
Service or your specialist dealer.

• Do not leave the appliance plugged in when not 

in use.

• Turn off the tap when not in use.
• Before any cleaning and maintenance switch off 

the machine or disconnect it from the mains.

• Never open the door forcibly or use it as a step.
• If necessary, the power cable may be replaced 

with an identical one obtained from our After-
Sales Service. The power cable must only be 
replaced by a qualified technician.

2.Packaging

• The packaging material is entirely recyclable, and 

marked with the recycling symbol 

. Adhere 

to current local regulations when disposing of 
packaging material.

3.Disposing of packaging and scrapping 

old washing machines

• The washing machine is built from reusable 

materials. It must be disposed of in compliance 
with current local waste disposal regulations.

• Before scrapping, remove all detergent residues 

and cut off the power cable so that the washing 
machine is made unusable.

• This appliance is marked according to the 

European directive 2002/96/EC on Waste 
Electrical and Electronic Equipment (WEEE).
By ensuring this product is disposed of correctly, 
you will help prevent potential negative 
consequences for the environment and human 
health, which could otherwise be caused by 
inappropriate waste handling of this product. 

The symbol 

 on the product, or on the 

documents accompanying the product, indicates 
that this appliance may not be treated as 
household waste. Instead it shall be handed over 
to the applicable collection point for the recycling 
of electrical and electronic equipment. 
Disposal must be carried out in accordance with local 
environmental regulations for waste disposal.
For more detailed information about treatment, 
recovery and recycling of this product, please contact 
your local city office, your household waste disposal 
service or the shop where you purchased the product.

4.Frost

Do not place the washing machine in a room prone 
to frost. If you must,  make sure that the washing 
machine is completely drained after each wash:
• Remove inlet hose(s) from water tap and let the 

water flow out completely.

• Remove drain hose from siphon or handwash 

basin and let the water flow out completely.

• Empty residual water inside the machine by 

following the instructions in the chapter 
“Draining Residual Water”; tilt the appliance 
forward with two persons to let the rest water 
flow out completely.

5.Saving tips

The water consumption of your washing machine is 
optimized; in some programmes you therefore 
cannot see the water through the door glass when 
the machine is in operation. 
• Achieve the best use of energy, water, detergent 

and time by using the recommended maximum 
load size.

• Do not exceed the detergent dosages indicated 

in the manufacturer’s instructions.

• The Eco-Ball - a special system in the outlet - will 

prevent detergent loss from the drum to avoid 
detergent loss into the environment.

• Use “Prewash” (if available on your model) for 

heavily soiled laundry only! Save detergent, time, 
water and energy consumption by not selecting 
“Prewash” for slightly to normally soiled laundry.

• Pretreat stains with stain remover or soak dried-

in stains in water before washing to reduce the 
necessity of a hot wash programme.

• Save energy by using a 60° C instead of a 95° C 

wash programme or a 40° C instead of a 60° C 
wash programme.

• Save energy and time by selecting a high spin 

speed to reduce the water content in laundry 
before using a tumble dryer.

6.EC Declaration of Conformity

• The appliance conforms to the following 

European Standards:
2006/95/EC Low Voltage Directive
2004/108/EC Electromagnetic Compatibility 
Directive

30106320GB.fm  Page 3  Tuesday, December 1, 2009  10:47 AM

Black process 45.0° 130.0 LPI 

Summary of Contents for 8559














Reviews: