OPERATIONAL REQUIREMENTS
FILLING THE DETERGENT DISPENSER
To open the detergent dispenser use the opening device A. Introduce the detergent into
the dry dispenser B only. Place the amount of detergent for pre-washing directly inside
the tub.
1.When measuring out the detergent Compartment
B
comprises a level showing the maximum
quantity of liquid or powder detergent that can be added to each cycle.
2. Remove detergent residues from the edges of the dispenser and close the cover until it clicks.
3. Close the lid of the detergent dispenser by pulling it up until the closing device is secured in
place.
Summary of Contents for 8003437205453
